Bambu Spool re-fill sleeve , Re-filament spool sleeve by precisionprintpro

precisionprintpro

3D Printer>3D Printer Parts

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

5.0(2)

Boost

Released

Description

I designed this as i didn't get any cardboard re-fill sleeves with the ams that came with 4 spools.

this has been designed in a way the sleeve goes onto the spool first then you slide the filament into the hole there is enough friction that it wont come loose but the ams will pull it free when your at the end of your roll without pulling the spool forward.

I have kept rfid tags from spools and wrote on them the colour and material so i can use them with this sleeve for ease of use

happy printing.

Comment & Rating (2)

@Andre.Stadler

Print Profile

0.16mm layer, 2 walls, 15% infill

First perfectly!

@wiletrey

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Works really well. My filament doesn’t go all of the way into the groove provided in the print, but it goes in enough to hold the filament in place while still allowing it come out at the end of the spool. Printed 3 in black and the rest in white because it’s easier to see how to insert the filament on a white surface.

No more