My first creation with hueforge, I'm learning together with my son. It may not be perfect but we like it. We will improve.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA+ Esun Orange Transmission Distance: 5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Orange
At layer #8 (0.72mm) swap to Pure Yellow for the rest.