Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Orange Transmission Distance: 10
PLA Red Transmission Distance: 5
PLA Orange Transmission Distance: 10
PLA Yellow Transmission Distance: 6
PLA White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #4 (0.64mm) swap to Orange
At layer #6 (0.96mm) swap to Red
At layer #7 (1.12mm) swap to Orange
At layer #11 (1.76mm) swap to Yellow
At layer #17 (2.72mm) swap to Jade White for the rest.

Frame: https://makerworld.com/en/models/209367#profileId-229295