Milwaukee M18 battery 4x wall mount

Copyright Claim

Milwaukee M18 battery 4x wall mount

Boost
176
283
42
GIF
GIF

Print Profile(3)

All
P1P
P1S
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 25% infill
0.2mm layer, 2 walls, 25% infill
Designer
6.5 h
1 plate
5.0(16)

0.2mm layer, 3 walls, 25% infill
0.2mm layer, 3 walls, 25% infill
Designer
6.7 h
1 plate
5.0(7)

One-Color: 0.2mm layer, 4 walls, 25% Gyroid - PETG
One-Color: 0.2mm layer, 4 walls, 25% Gyroid - PETG
7.3 h
1 plate

Boost
176
283
42
18
356
213
Released

Description

Yes there area lot of other battery holders including my own, BUT this one is king of aesthetics with its color a and design looking to par with the Milwaukee family of tools. Mounts solid to the wall and holds up to 4 of even 12 amp hour batteries. Hollowed out to not use so much plastic and and strong enough to keep them locked in. Lets face it we all buy the most expensive tools because A- They work great and B- They look good so the accessories have to match.

 

Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you'd like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

Comment & Rating (42)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm layer, 2 walls, 25% infill
printed in CF for the fun of it. perfect design
The designer has replied
2
Reply
Cool!
0
Reply
Print Profile
0.2mm layer, 2 walls, 25% infill
no to shabby in petg
The designer has replied
0
Reply
I like the color 🤙
0
Reply
Printed with Bambu PETG Basic. turned out perfect. Three fit on a single bed plate.
The designer has replied
0
Reply
WOW! Looks good💪 Thanks for sharing 🤙
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
0
Reply
Should I have to use supports ?
The designer has replied
0
Reply
Yes, it's included in the print profile. It is set to standard and snug. Its very small and only supports the locking part and they pop out easily
0
Reply
Replying to @OCDTOOLFREAK :
FYI your print profile does NOT include supports and it says in the description that no supports are needed.
0
Reply
Replying to @jdicerchio :
oh shoot thanks for the heads up. I'll get that fixed
0
Reply
Do you have a version that will work with standard pegboard?
The designer has replied
0
Reply
Hey that's a good idea. I don't yet but I can.
1
Reply
Replying to @OCDTOOLFREAK :
That would be awesome!
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 25% infill
Such an awesome print!
The designer has replied
0
Reply
Thanks for the great rating. I'm glad you like it 🤙
0
Reply
Print Profile
0.2mm layer, 2 walls, 25% infill
Love the model and colors. It holds my big M18 batteries really well. I was able to mount it upsidedown in my service pickup and never has it broke in bumpy roads and section lines. Highly recommended
The designer has replied
0
Reply
Hey, that's great to hear! I'm glad it works good for you and thanks for the positive feed back 🤙
0
Reply
How can I print this in Generic Inland PETG? I am stumped on how to change the settings. I have my AMS loaded with 2 black PETG and 2 Red PETG but it keeps coming up with PLA. Thanks
The designer has replied
0
Reply
you'll have to change that in bambu studio and resync
0
Reply
How do you change the color the Milwaukee.
The designer has replied
0
Reply
you'll have to use the paint option
0
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.