DJI Action2 Travel Case by sccdsix

sccdsix

Hobby & DIY>Sport & Outdoors

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

8.2 h

2 plates

0.2mm layer, 2 walls, 15% infill

Designer

4.4 h

2 plates

5.0(3)

Boost

Released

Description

A case for DJI action2 camera, Can hold all 3 camera modules, with magnet chest mount, magnet ballhead, sticky mount.
printed with PLA and TPU.

There are 2 versions, with and without the clip

the version with clip is better in my opinion:

Parts layout:

Requirements:

m3x30Screw: 2

m3x25Screw: 4(for the clip)

M3LockNuts: 6(4 for the clip)

dji action 2

travel case

Comment & Rating (12)

@fabiorossi.pa

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfetto!

@mxs7231

Great print, where did you find the case inline with filter slots version?

@fabiorossi.pa

Replying to @mxs7231 :

hi, sorry for the delay. I modified it

@mxs7231

Love this case! Great print, but where is the case inline with ND filter slots version? I could really use that version, the CaseInline_WithMagFilter.stl and the CaseInline.stl are identical. Neither one has the slots for the ND filters

The designer has replied

@sccdsix

I believe that was a custom edit from @fabiorossi.pa ,He might be able to provide you with that version.

@fabiorossi.pa

Replying to @sccdsix :

hi, sorry for the delay. I modified it

(Edited)

@virtualisoftwar

doesn't fit action 2, bad tolerance, but i love the design

The designer has replied

@sccdsix

I test print this desgin multiple times, I'm sure it fits action 2 nicely. The CaseInline part should be printed with TPU, Otherwise it will not fit. At end of the day, if you are still having trouble, the step files are provided, you can edit the tolerance as you wish. :)

@virtualisoftwar

Replying to @sccdsix :

ah ok sorry, i 3d printed it with pla, i did't know that the material makes so much difference for tolerance, thank you very much:)

@ArtsByKev

Print Profile

0.2mm layer, 2 walls, 15% infill

Loved this model, and it was a great find for my DJI action camera. Did print this on a 0,4 nozzle instead, and did thus opt in to size up the print to around 102.5% (min 102%) to combat the thicker walls.