ISS Vanguard Insert Wave 1 all in by scuzzy19

scuzzy19

Toys & Games>Board Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 6 walls, 10% infill

Designer

18.8 h

3 plates

Boost

Released

Description

This is a custom insert for ISS Vanguard All in with Deluxe section Boxes, I didnt want to have 4 boxes out to play this game, so I set out to design a custom insert that will fit all of the base campaign, Deluxe section boxes, Section Pets, Personnel files in a single box fully sleeved.

You can also store the neoprene mats in the box, lid lift shown in image with lidlift.

I do consider this insert complete. if I make any changes along the way I will update accordingly. this insert was made with measurements for Awaken Realms sleeve that were part of their all in. they measure at 66x90mm

Comment & Rating (13)

@Hextra

The small card tray (black) does not fit into the box as shown. There is an additional slot on the side of it, which looks like it could be functional if the tray was sized to include it. But as it is currently, that additional slot makes the tray too long for its place. The large card tray unfortunately does not fit GameGenic Prime sleeves as they are slightly too long to fit without bending. I recognize the trays were made for the AR sleeves, but there's a decent amount of dead space within the token/dice/mini trays that a few mm could be added to accommodate slightly larger sleeves. Thanks for the effort!

The designer has replied

@scuzzy19

The wrong file was uploaded for that black tray, that is entirely my fault. I'll get that fixed.

@scuzzy19

I have uploaded the corrected file for the ship section box if you want to give me the measurements for your sleeves Ill adjust the model for those kind as well and remove some from the dice trays and minis trays to accomodate

(Edited)

@driph

Boosted

Replying to @scuzzy19 :

Thank you! Just a heads up, your uploaded print profile (dated 3-3) appears to still have the too-long card tray.

@user_1110777110

Great work, thanks for the insert! Just curious: Will you work on something for the wave 2 content too?

The designer has replied

@scuzzy19

I will! I have all of my wave 2 content, just havent gotten around to it quite yet

@GelnartheGrey

Boosted

nice insert! looks like the long card box gets printed twice? and I can probably figure it out but are there better photos of what cards go where? thanks for your work on this

The designer has replied

@scuzzy19

Correct, one if possible should be printed in white and the other in black, its so you know what section the cards belong to so it matches the stock card holders for planet(a) and ship section(b)

@GelnartheGrey

Boosted

thank you

@scuzzy19

Files have been updated for larger sleeves based off of feedback from user.

@scuzzy19

I will be modifying the card trays and adding a few millimeters and removing from dice trays/player trays. if you have previously downloaded this please hold off on printing if you have anything other than the sleeves from AR