(right and left front legs needs the parts edited so hold off on printing)
Front power supply mount/Feet, Flush with the top of the 4040, Needs angled power supply cord. I also mounted the switch from the out side to the inside of the cover to get a little more space. I have a rear mounted motherboard/PI case. The reason why i moved the power supply was due to the Dual Z and wanted the fan facing down. Will post pics as soon as i get around to it.
(right and left front legs needs the parts edited so hold off on printing)
Printer:
Hypercube Evo
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15