本模型适用于小米米家蓝牙温湿度计2。

我所有干燥箱都是用 西伯利亚的土豆 制作的5.8L干燥箱支架，为了不再重新打印其他带温度计的支架，所以结合支架和温度计模型制作了可以加装的温度计支架。

相对原支架，宽度略微增加了0.5毫米，使其能卡的更紧，我打了4个，只有其中一个有点过紧，但问题不大，还是可以安装的。（不知为何，这个支架本身就是有点紧）

This model is suitable for the Xiaomi Mijia Bluetooth Thermometer and Hygrometer 2.

All my dry boxes are made with 5.8L dry box brackets made of  西伯利亚的土豆 . In order to avoid reprinting other brackets with thermometers, I combined the bracket and thermometer models to create an attachable thermometer bracket.

Compared to the original bracket, the width has been slightly increased by 0.5mm to make it fit tighter. I printed four of them, only one of which was a bit too tight, but it was not a big problem and could still be installed.