This is a simple 10mm hook for the X1/P1 series. It has two parts - the first slips over the inner frame and is thin enough to allow the glass top to sit flush. The second is the 10mm hook which has a tight fit into the first part. This can be used for safety glasses, scissors, signs, etc. You can also scale the parts in the z-axis within the print profile to meet the desired hook width.

If you like this holder, please check out the other models in this series. If you have any suggestions on other models to add, please drop a comment!

Flush Cutter Holder: https://makerworld.com/en/models/171018#profileId-187705

Glue Stick Holder: https://makerworld.com/en/models/179272#profileId-197193

Filament Clips Holder: https://makerworld.com/en/models/179273#profileId-197194

Filament Clips Holder XL: https://makerworld.com/en/models/208140#profileId-228205

Amervault 3D-Print Tool Holder: https://makerworld.com/en/models/179274#profileId-197195

Generic 10mm Hook: https://makerworld.com/en/models/208157#profileId-228216

Calipers Holder: https://makerworld.com/en/models/217585#profileId-236556