Makita battery carrier - 18V, 12V and 10,8V
Remixed by
Copyright Claim
Makita battery carrier - 18V, 12V and 10,8V
Remixed by
Boost
44
61
20
GIF
Print Profile(3)
0,4mm nozzle, 0.2mm layer, 2 walls, 10% infill
Designer
11.5 h
1 plate
0.6mm nozzle, 0.42mm layer, 2 walls, 15% infill
Designer
10.7 h
1 plate
18v only Single Color 0.24mm layer, 3 walls, 15% infill
5.9 h
1 plate
Boost
44
61
20
4
172
34
Released
Description
I needed a battery carrier, that can hold the different battery types, that I have from makita, so I made this remix.
The batteries fit in snugly and its very durable and lightweight.
Comment & Rating (20)
All
Print Profile
18v only Single Color 0.24mm layer, 3 walls, 15% infill
missing some of name on top
The designer has replied
0
Reply
wow, that looks weird. Which file did you choose?? This is the first I have heard of this..
0
Reply
Boosted
My print profile, took a look, it seems this is a artifact of the top not actually being flat so there is a layer change along that line on the OP's print profile, but with the taller extrusion height of my profile the cut isn't deep enough to go through both layers.
(Edited)1
Reply
sorry I meant 18 v
The designer has replied
0
Reply
That shouldn't be too hard.. :) I'll make it tonight.. You are not the only one asking for it. :)
0
Reply
thank you so much
0
Reply
Replying to @Tag3mand
hi, is this available?
0
Reply
Excellent stuff - What Colour/brand of filiment did you use?
The designer has replied
0
Reply
This one. 😊
0
Reply
Replying to @Tag3mand
thank you, very much aprrecated.!
0
Reply
Excellent work, can you add another with a 12V in both sides? So instead of the 10,8 then another 12V. :)
The designer has replied
0
Reply
It's already there.. 😊
0
Reply
it is available in only 12v battery
The designer has replied
0
Reply
Not at this time unfortunately.. But think I can make one in near future.. 😊
(Edited)0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 2 walls, 10% infill
I think I will be printing again and will be adding supports under the handle. the quality under there was not great. But that could be my fan control not being great.
0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
18v only Single Color 0.24mm layer, 3 walls, 15% infill
0
Reply
Boosted
Print Profile
0,4mm nozzle, 0.2mm layer, 2 walls, 10% infill
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld