Stealth Press + the most usefull Mods
Stealth Press + the most usefull Mods
Print Profile(1)
Description
About this Upload
I´ve done this upload to combine the most usefull things arround the Stealth Press Project from Iconic FAB.
Things i´ve included in this Package are the following Mods:
Stealth Press Drawer Mod from 3DP-MAMSIH@3DPMAMSIH
Stealth Press Keybak Replacemet Doorpuller from thomasfjen@thomasfjen_222021
Stealth Press Handle from radicalreel@radicalreel
The Main-Build Process is covered by the Video from Iconic Fab:
| Mechanical parts | QTY |
|---|---|
| M3x8 SHCS — Bolts (Source: INT) | 40 |
| M5x25 SCHS — Bolts (Sources: INT) | 2 |
| F695-2RS — Bearings (F = Flanged) (Source: INT) | 4 |
| M3 — Threaded Inserts — M3x5x4 (M3 x (OD)5 x (L)4 —VORON) (Source: INT) | 30 |
| MGN12H — Linear Rail — 300mm — Black (Source: INT) or SS (Source: INT) | 1 |
| KEY-BAK — Super48 36" 13oz (Source: INT) | 1 |
| Printed Parts | |
|---|---|
| The most current revision is R1.1 - check the change log below! | |
| Printed parts | 16 |
| Soldering iron-related parts | |
|---|---|
| Heat-set insert tips vary for the type of soldering iron used! | |
| Soldering iron (Generic, TS100/101 or Pinecil) | 1 |
| Soldering Adapter for heat-set inserts (Source: INT) | 1 |
ASSEMBLY MANUAL
Download the full assembly manual with visuals and a step-by-step guide.
BOM for the Drawer MOD + the original design
- 4x magnets of 3X6mm for the Drawer
- 3x M3 Heat inserts (2x for the Extension base , 1x for the Handle )
- 2x M3x10mm screws ( 2x for the Extension base )
- 1x M3x25mm ( for the Handle )
Print setting
- like the original one no change
- no support needed
Parts Needed for this ( not included the original parts for complete the Build)
- Main_Core_Part
- Build-plate-main
- Build-Plate_extension
- Handle
- Drawer_front_x1
- Drawer_Base_x1
Optional Parts, printed them by myself and they will work also!
- Main_core_Light_version
- front_drawer_light_v
The Handle-Mod on Top is an easy swap out of the original printfiles, so no more Informations are needed.
I hope you like the Idea behind this Collection.
The Credits goes to the marked Designers above!
Thanks for sharing your awesome work!
Comment & Rating (2)
