Summary

A stand for the Argon ONE case for Raspberry Pi 4, featuring a camera mount for PiCam v2.1.

NO SUPPORT NEEDED FOR ANY OF THE PARTS!

The print consists of 6 parts:
• Legs (2 parts for easier printing; simple click assembly)
• Case holder with ball-joint mount
• Connector for ball-joint to camera housing
• Camera housing for PiCam v2.1
• Back plate for the camera housing to fasten the camera

THIS IS COMPATIBLE WITH MY "JD BALL JOINT v1":
JD BALL JOINT v1 by jakobdam - MakerWorld

By connecting one or more JD BALL JOINT v1's, you can make a camera arm to fit your exact needs.

Just ensure that your camera cable is long enough.

On the back of the case, there's room for gluing in magnets (10x10mm). This is for people who don't want it to stand on a table, but who prefer to attach it to a metal surface.

Print Settings                                            

Rafts:                     

No

Supports: 

No

Resolution:                     

0.2

Infill: 

15%
                        

Notes:                    

Print settings:

• No support
• No bed adhesion is needed, but recommended for just the "connector" part
• 0.2 - 0.3mm layer height
• 3 walls
• Infill density at 15%

I used 75-80g filament to make it all.