This is my remixed version from (https://makerworld.com/en/models/192093#profileId-212186).

12 can dispenser that can be used in the refridgerator or anywhere you'd like really. Dimensions for this are 44cm L x 14 cm H x 13.5 cm W.

I joined together the sliced end pieces for the rear so that they print as 1 piece without the need to glue the 2 pieces together. I also added some middle pieces to join the 2 sides together as the original didn't include them.

No support needed for the big pieces. Support is needed for the middle pieces and pegs. I used tree organic supports.

Assembly is pretty simple. You use the alignment peg to join the 2 long pieces together. You use the 4 middles pieces to join the 2 sides together. The top 2 middle pieces and the front middle piece are oriented horizontally. The bottom rear middle piece is oriented vertically. Please refer to my 2nd and 3rd pictures if this is unclear.

A little dash of super glue between all the pieces and you are done.