WHEEL LOADER PRINT IN PLACE
$2.10 WHEEL LOADER PRINT IN PLACE
Published 2024-02-20T11:44:31+00:00
Wheel loader print in place no supports. The loader model is detailed and fully functional, it has a rotating cabin and a movable shovel.
This is a articulated print, so be careful that your first layer is nice and neat and that there are no printing problems, such as stringing or over-extrusion, that could join the moving parts together.
This is a print in place and does not require any support.
Similar models:
-THREE-AXLE DUMPER TRUCK WITH WORKABLE DUMPER:https://www.myminifactory.com/object/3d-print-three-axle-dumper-truck-with-workable-dumper-print-in-place-336446
-DUMP TRUCK:https://www.myminifactory.com/object/3d-print-dump-truck-print-in-place-332878
-TRUCK WITH TRAILER:https://www.myminifactory.com/object/3d-print-truck-with-trailer-print-in-place-281446
If you want to legally sell the printed models, you can get my permission through this link: https://www.patreon.com/Swah3d
This is a moderately challenging print! Mostly because it relies so much on the adhesion of the first layer. So make sure twice about the quality of your first layer and the bed adhesion.
0.4 mm nozzle
Layer height 0.2 mm
15% infill or more
3 walls
PLA works best
Need support?
Not at all! Designed for direct printing!
Scalability
You can scale down. The red loader is scaled down to 50% and the layer height is 0.12 mm
Print orientation
As oriented in the STL file
Have fun, happy printing
Date published | 20/02/2024 |
Price | $2.10 |