Snow Capped Mountain Scene Wall Art (hueforge)

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Sky Blue Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #13 (0.72mm) swap to Blue
At layer #16 (0.84mm) swap to Sky Blue
At layer #22 (1.08mm) swap to White for the rest.

please follow the settings in the bambu wiki seen below for best Results.

(1) Adjust the min layer height to 0.04 mm.

(2) Confirm specific process parameters