The cutest stress ‘’ball'' squishy toy has arrived : It's the easter edition peeps
Printing Tips :
- If you are not using the provided profiles, add a small 5mm diameter cylinder modifier with no bottoms at the bottom of the cone
- Print in TPU, Duramic 3D 95A will work great
- Option 1 : 0,4mm nozzle profile is squishy but stiff
- Option 2 : 0,6mm nozzle profile will give a squishier feel
- Generic TPU filament profile worked great for me
Printing Settings :
- For a 0,4mm nozzle : 0,20mm layers, 6 tops, 3 bottoms, 2 walls, 5% gyroid infill
- For a 0,6mm nozzle : 0,24mm layers, 4 tops. 3 bottoms, 1 wall, 4% gyroid infill
Disclaimer :
- AMS and AMS Lite are not meant to feed TPU to the printer, use the external spool option
- The hole at the bottom of the print is meant to be there, it helps air escape and enhances the squishiness
- The squishiness of the stress ball will vary with TPU hardness, brand and color, you can play around with the infill % to change the feel
*The pictured basket is from another creator, find it here