Cain Marko, better known as Juggernaut, is a long time enemy and sometimes ally of the X-Men. As a child, Cain was regularly abused by his alcoholic father. His stepbrother, Charles Xavier, on the other hand was treated much better while also exceeding him in studies and sports. All of it caused Cain to hate Xavier for years. While serving in the US army, Cain accidently found the Temple of Cyttorak and obtained the Crimson Gem. The Gem's mystical power transformed Marko into Cyttorak's avatar on Earth — the Juggernaut. Marko used his powers to spread chaos and cause destruction often together with his partner-in-crime Black Tom Cassidy.

-------

For more of my comic book prints you can find the files in this collection here:

https://makerworld.com/en/u/4065522623/collections/549689

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. 
 

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0
PLA Sunlu Red Transmission Distance: 5
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Latte Brown Transmission Distance: 2

Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Red
At layer #20 (1.68mm) swap to Dark Brown
At layer #24 (2mm) swap to Latte Brown for the rest.