Vintage Esso man lightbox with chargeable18650 battery usb c

This is a Vintage Esso man lightbox with place for a chargeable18650 battery, TP4056 USB-C / Micro USB card and a on/off button

Printing tips:

I used Bambu Labs Basic PLA with standard settings other than these:

Temperature:

210º Intial layer

67º Textured pei

0,20mm layer height

Quality:

Go to Preferences (ctrl + P) an activate developer settings

• Arachne Wall generator
• 50º Wall transitioning threshold angle
• 1,03 First Layer Flow Ratio

Strength:

• 20% Infill/wall overlap

Speed:

• 30 Intial layer
• 60 Intial layer infill
• 100 Outer wall

Support:

• Enable support
• Tree(auto) type
• Tree slim Style
• On build plate only

Others:

• No-brim Brim type
• 45mm Prime Tower width
• 50 Prime volume

Order color printing from lightest to darkest color

Make sure you have a good grip on the build plate. I use Textured pei plate, with temperature 67

The design process:

Designed from a picture found on internet by me in Vector Magic and Fusion 360

Size:

• Height: 237mm
• Width: 126mm
• Depth: 40mm

Parts I used:

18650 Battery

On/Off button

TP4056 Charger module

LED stripe

I'm just a hobbyist, trying to make some things, not a professional designer

(Please keep this in mind if you post a review)