Foto del bacio più famoso della storia, sperando di aver fatto cosa gradita ecco i parametri qui sotto:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA SunLu Black Transmission Distance: 5
PLA SunLu Grey Transmission Distance: 5
PLA SunLu LightGrey Transmission Distance: 5
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Grey
At layer #11 (0.96mm) swap to LightGrey
At layer #19 (1.6mm) swap to Cotton White for the rest.

Grazie e buona stampa a tutti