Pastamatic Guiding-Cube Upgrade
Copyright Claim
Pastamatic Guiding-Cube Upgrade
Boost
7
31
7
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
24 min
1 plate
Boost
7
31
7
0
69
35
Released
Description
I reinvented the Cube that holds the Guidingstone in Place. The Original from the great Pastamatic don`t stay in Place.
The Screw is a M4x15. I Took the hole bigger for the Screwhead so the most Screws should fit.
If you need something like this but have no time? Here is a simple Clamb for fast help. Otherwise you should use this here.
Here are my other Pastamatic Add on`s:
Enjoy, have Fun and Visit or Follow my Profile for more!
Comment & Rating (7)
All
I was about to print this when i realized you can rotate the cube 90 degrees and it press-fits securely :P
The designer has replied
1
Reply
thx for the info. At mine the cube is 0.55mm bigger as the space in the hole. I didn’t use PLA, perhaps there is more shrinking at this.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great add on!!!
The designer has replied
0
Reply
Thx!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld