Flexi Hammerhead Shark - New Type, and Mini Set(Print-in-place)

[Update]
---2024/02/01---
Added 3mf file for Prusa Slicer.

This is an upgraded version of the flexi hammerhead shark I published on Thingiverse.
https://www.thingiverse.com/thing:5995499
Since the model was well received on Thingiverse, we have renewed it with a newly rebuilt body. Compared to the old model, the new model can be moved more flexibly.

This model includes the following digital content
01: STL - Hammerhead Shark
02: STL - Hammerhead Shark(Mini Type)
03: 3mf (Bambu)- Hammerhead Shark
04: 3mf (Bambu)- Hammerhead Shark(Mini Type)
05: 3mf (Prusa)- Hammerhead Shark
06: 3mf (Prusa)- Hammerhead Shark(Mini Type)

03 and 04 are 3mf files for multi-color that are compatible with Bambu Studio, and 05 and 06 are 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files.

New mini type model is also included. This mini type has a standard version and a keychain-compatible model, allowing you to choose your favorite type.

Print in Place with no supports. No assembly required.
Please take pictures of your Flexi and share them with us!

💰Commercial Use💰
This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the terms of use.
Ex) Sell 3D printed Flexi on Etsy, flea markets, etc.
For more information, please see the terms and conditions below.
https://cults3d.com/en/licenses#cults_cu_nd
⚠Attention⚠
Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes.
(Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)

💷Support💷
If you would like to chip in or support us, we would be happy to purchase a paid model for sale on Cults.

⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

Rafts:No
Supports:No
Layer Height: 0.1-0.3 mm
Infill:15-20%
Filament material: PLA

{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Right
Z Seam Corner Preference: Hide Seam
Build Plate Adhesion Type: Skirt or None