chariot élévateur avec fourche mobile (board game) - forklift with moving fork (board game)

Here's a Fenwick forklift equipped with a spring to move the forks.

It's fully printable (the spring too).

So you can have fun moving objects (spool and pallet supplied).

What's more, this can be used as a puzzle game by printing out 2 green, 2 red and 2 blue reels, then printing and cutting out the cards:

https://docs.google.com/document/d/1fkOSAge2vhS-urS8n2mIA-DJfcotAgokDhLNwDCyzNk/edit?usp=sharing

A card is drawn and the required stack is created on the palette.

Then remove a card: be careful to do everything in the right order!

This can also be used as a board game: 2 fenwicks, each with a pallet and 6 reels, and the fastest to stack wins.

Here is a Fenwick type forklift model equipped with a spring allowing it to move the fork.

It is fully printable (the spring also).

You will be able to have fun moving objects (reel and palette are provided).

In addition, this one can be used as a puzzle game by printing 2 green, 2 red and 2 blue reels then printing and cutting out the cards :

https://docs.google.com/document/d/1fkOSAge2vhS-urS8n2mIA-DJfcotAgokDhLNwDCyzNk/edit?usp=sharing

We draw a card and we must create the requested stack on the palette.

Then remove a card: be careful to do everything in order!

This can also be used as a board game: 2 fenwicks and each a palette and 6 reels and the fastest to stack wins.

The object was designed with fusion360, 3Dbuilder, blender and meshmixer.

everything is checked for easy, trouble-free printing.

This model was designed on an ender 3v2 with Cura version 5.5.0 No Rafts and requires the use of supports (Gyroid for me...) It was printed with PLA+ with 50% fill but any other material will do.

Shrinkage is 4mm with a speed of 25mm/s.

Nozzle temperature is 200°C, plate 60°C.

Object was designed with fusion360, 3Dbuilder, blender and meshmixer.

it is all checked to be printed easily without anomalies.

This model was designed on an ender 3v2 with Cura version 5.5.0 No Rafts and requires putting in supports (Gyroid for me ...) It was printed with PLA+ with 50% infill but any other material will work.

the retraction is 4mm with a speed of 25mm/s.

the nozzle temperature is 200°C, the plate at 60°C.