DIN rail bracket for 4 Shelly automations in electrical panels used in home automation systems

I am sharing a bracket to house up to four shelly of the recessed type, on DIN rail from the automation panel.

This is a firm anchoring bracket, which can be reversible to the right or left.

The shelly entry is from the front and therefore will not need to be disassembled later for handling.

The design allows the aeration of the automatisms that once assembled will be hidden and fixed by means of a cover that is placed on the front.

It is not necessary to open holes in the front of the panel, therefore they can be repositioned inside the panel to other positions without altering the legends on the front or having to break tabs on the cover.

The dimensions allow it to be used in all current flush-mounted versions of shelly operators, including the Qubino series, for which it has conduits that allow the antenna cable to be positioned.

The parts are designed with functionality and easy printing in mind.

I hope you find it useful, as always it's just print and go.

Remember that all the pieces published, I print and use them several times until I am satisfied with their functionality and printing. If you have any questions you can drop me a note.

I recommend 4 or 5 outer walls and 1.2mm top and bottom.

It can be printed on the material of your choice.