Breath of the Wild - Zipper Guardian

Welcome to Tabletop Toys, where sometimes you just want to play and have fun!
So my zipper fixation is not quite over it seems. This time around I made a 6-sided zipper! (Hexa-zipper?) But a zipper so grand as this needed a purpose, and so I have merged my zipper with my love of video games and created a Breath of the Wild Guardian with zipper legs! The Zipper Guardian has come to face down Link...cue boss musical score. A huge thanks to Wewyllenium for permission to use some of his base Breath of the Wild - Guardian models. He has a great selection of BOTW and TOTKgame-accurate models which you can find here.

Depending on how tuned your printer is, the chains may print a little tight. I included a Chain Test model with only 5 chain links for you to test your printer. If the links cannot move, or be loosened with use, then I would recommend you print each Zipper Subunit (all 90) and link them together manually.

I had to break my no-support rule with this one, but I think it is quite worth it! the Build Plate 2 file should be printed with supports, but the Build Plate 1 file can be printed without supports.

I hope you have as much fun with this toy as I do!

All of my models are designed to be printed and assembled without any additional hardware.

ALL of my designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell them, you may obtain my permission through this link: https://www.patreon.com/One4AllDesigns

https://youtu.be/vtG2H95BZIM

I had to break my no-support rule with this one, but I think it is quite worth it! the Build Plate 2 file should be printed with supports, but the Build Plate 1 file can be printed without supports.

0.2mm Layer Height
20% Infill
PLA

Printer should be well tuned (check out the Modular Mechanics - Free Model for a good baseline Cura Profile. Check print temp and Z-offset though!)