MENAT STREET FIGHTER COLLECTIBLE EDITION When you download you will have 8 Stl Files (Total 1 ,5 GB )
Disassembled Parts
1.Base 2.Head With Hair 3.Hip Torso and Left Arm 4.Left Foot 5.Left Hand 6.Left Leg 7.Right Arm 8.Right Leg 9.Right Foot
Full Version
Full Body With Base This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.
Technical Suggestion
While designing the model, narrow angles were avoided as much as possible. When throwing support, calculate 45% slope. While cleaning the supports, heating a needle over a flame and touching it to the ends of the supports can ensure smooth cleaning.
Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.
Twitter : https://twitter.com/YunusKullebi Instagram: https://www.instagram.com/yunuskullebi/ Instagram : https://www.instagram.com/nuskulart/ Linktr : https://linktr.ee/yunuskullebi
3D PRINTING SETTINGS Print Temperature : : 200 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20
Support Settings
Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2