Fallout Liberator – 3D Print .STL File

The annoyingly but respectably persistent Liberator Mk0 robot from Bethesda’s Fallout 76.

This design comes with two options upon purchase for printing:
1. A static display configuration standing up with legs out
2. A complex foldable/locking-hinge leg design that allows the Liberator to be swapped from a standing display to a compact artillery shell form with display stand. Hinge joints use nested .STL components when printing

Please note that the foldable leg design is recommended for experienced 3D printing users

Approx. Max Dimensions.

Standing:
• 250mm (L) x 250mm (W) x 250mm (H)
• 9 7/8” (L) x 9 7/8” (W) x 9 7/8” (H)

Compact Artillery Shell:
• 100mm (L) x 100mm (W) x 215mm (H)
• 4” (L) x 4” (W) x 8 1/2” (H)

These are recommended to be used as static display props only.
The designs include detailed .pdf assembly instructions
Recommend for print with PLA, ABS and PETG filaments.
All .STL print files have been pre-oriented for 3D printing.

This is not a licenced product and is considered fan art.

Folding leg variant contains nested components that may bind if resolution is too low.

Layer Height (Small Pieces): 0.16-0.2mm
Layer Height (Large Pieces): 0.2-0.28mm
Infill: 15-20%
Supports: Yes

Not recommended for FDM printers with 0.6mm extruder nozzles or larger