Ender 3 V2 Body Kit | Ender 3 V2 Upgrades | Ender 3 V2 Fan Shroud | Ender 3 V2 Hot End Shroud | Ender 3 V2 Handle | Lowk Body Kit | Ender 3 V2 Accessories

Here Is the Lowk Body Kit designed for your Ender 3 V2

I am very cosmetically inclined for the environment that I am in. I am surrounded by Ender 3 V2s in my office and I wanted to see if I can find a way to make them look cooler, rather than be surrounded by a bunch of black machines. After searching for something already made and not finding anything I took it upon my self to design a body kit that mirrored both my style and my environment.

If you are like me and want your machine to look cool than this is definitely for you.

This Pack Includes:
Top Bar Cover with Connecting Piece and 2 Half Pins
X-Axis Plate
X-Belt Tensioner
Bed Handle
Y-Belt Tensioner
4 Plates to cover the base
1 Compatible Plate for Dual Z
2 Center Plates to cover the front
2 Sides Holding the Center Plates with 2 Half Pins and 2 Full Pins
2 Front extended Legs
2 Rear Extended Legs

You will need 8 m3 screws that are a minimum of 10mm long and 8 t-nuts to go along with them to fasten the plates to the printer frame.
The X axis Plate cover that holds the sensor will need new m3 screws since the stock screws that were there, are way too long. The M3 kit I used is listed at the bottom is good for the body kit as well as replacement screws for the printer because the stock screws suck and strip easily.

Check Urls at the bottom for both T Nuts and M3 Screw Kit

The Shroud is not in this pack and is up for free on my page.
I have listed the settings I use for speed since there is quite a bit of pieces to print. Everything in the pictures listed are at settings listed

** If you bring down the nozzle to touch the build plate and it cant reach because the X Belt Tensioner is hitting the back of the screen simply loosen screen mount screws and pull screen forward and then tighten. **

No one is able to sell the Lowk Body Kit in Physical form besides my self.

I have launched a Patreon for my designs, for those who are interested in selling my stuff or those who are wanting to save money rather than buy my files separately.

https://www.patreon.com/ProjectLowk

There is two tiers.
'Lowk Dealers' $9 - Those who want to sell my items can do so through this tier earning the authorized seller badge.

'Lowk Users' $6 - Those who want to save money and get all current design files free. Not able to sell.

I will have both fun and functional prints listed here and on Patreon for those who are subscribed.

Happy Printing!
-Lowk

M3 Screw Kit : https://www.amazon.com/Metric-Screws-Suitable-Printer-Assortment/dp/B0B51BFSWZ/ref=sr_1_2_sspa?crid=1WUCO5GY1CF8R&keywords=m3+screw&qid=1686800848&sprefix=m3+%2Caps%2C484&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQkdRMDdOUDdWRzVSJmVuY3J5cHRlZElkPUEwOTYxOTQ5V1RDR1FSUVZGM1ZHJmVuY3J5cHRlZEFkSWQ9QTA3MTY5MjQzMUNUUThUMVkzNE0md2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

T Nuts: https://www.amazon.com/Powlankou-Pieces-Fastener-Aluminum-Profile/dp/B07SDFCTD4/ref=sr_1_13?crid=2EIEXT5CI15VT&keywords=m3+screw+t+nut&qid=1686807063&sprefix=m3+screw+t+nu%2Caps%2C703&sr=8-13

-Slicer Settings I use that are good for speed with good quality. Tweak as you will.

Layer Height: 0.3
Top Layers: 3
Bottom Layers: 2
Infill: 15%
Speed: 60%
Outer Wall Speed: 20%
Top/Bottom Speed: 20%
Support: Yes