3D print models of MichaelJacksons jacket arm badges- SuperBowl 3D print model

Hello:)

I have become a big fan of Michael Jackson since 1999. Michael Jackson has always been my inspiration and one of my motivations for life. If you are also a fan of Michael Jackson and on the other hand, you are interested in printing 3D models, I have designed a 3D model of Michael Jackson's jacket arm badges.

This badge was attached to the arm of Michael Jackson's jacket and was golden in color.

Michael used to attach this badge to his jacket during the Dangerous Tour or the 1993 Super Bowl performance.

The files that I have prepared are low-polygon but high-quality STL files that are presented as solid and hollow with holes. If you are looking for this badge for your dance clothes, you can prepare this file and print it with a resin printer or FDM printer and simply apply a golden color on it with a golden spray and then protect its color with a glossy varnish spray.

And the good news is that if you are a fan of Michael Jackson, be sure to join me so that I can put more professional models for you to complete your Michael collection. Be happy and shine :)

The advantages of this 3D models

• High model quality

• High detail of the models

• Prepared for resin 3D printing and FDM printing

• The files are free of common errors in 3D printers or slicer software

• The files are very light

• Badge file without shield and V shape is provided in 3 lengths of 8 , 6 and 4 cm

• The mentioned files are provided in 8 and 6 cm lengths both in solid and hollow form and in hollow form with holes, and the 4 cm file is provided in solid form.

• Badge file with shield is provided in two lengths of 8 and 6 cm in solid form

• The V shape file is also provided separately.

However, I will be happy if you have any comments or suggestions or see something in the files, let me know so that I can improve my work.

Order regarding STL printable file:

If you had an STL or OBG file that was too heavy or had a print error, or you wanted to cut it into several pieces, which have pin parts, or if you want to make your STL file hollow and on the surface Add those holes to drain the resin, thank you for letting me know your order through direct message :)