Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6203020.

PiP Ford Mustang inspired by 1967 Ford Mustang

Ford Mustang

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6202885.

Ahsoka Tano lightsabers holder "Rebels" and "Ahsoka" edition. for the exact measurement of the galaxy's edge old edition.

with 2 types of bases, 1st regular and the second with place for the batteries so they won't discharge and get corrosion inside the hilt.

print 2 of every type of rod.

Enjoy!

Lightdaber Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6290735.

Magazine loader for a 9mm M&P Shield Plus (probably the regular shield and more m&p 9mm magazine too).


Magazine Loader - Shield Plus

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5324255.

Guitar Pick Dispenser. for regular sized picks

V2 - 6 in a row, can be mounted by double side tape.

V3 - 5 in a row, can be mounted by glue or screw (#3 Flat Head Machine Screw (100deg))

V4 modular - 1 slot but can be added more of V4 type (i never tested it but it should work with some glue)

can hold 7-14~ depends on pick thickness.




Guitar Pick Dispenser

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6202992.

Remote control holder - best for TCL TV Remote control.

designed to guide the remote in for lazy ones of us.

Dimensions: 16x40 (depth x width), for every other remote control.
M4 flat head screw hole.

Remote Control Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5382208.

wall hanger connect to the wall with screws.
you need to print it twice it is symmetrical, the reason for 2 part is so it will fit for every tablet size.

the pen holder may need some sending to fit it all the way down.
you have to choices on the angel of the pen:
1) goes in an angel outside the wall so it easier to reach and don't interfere with charging cable if on that side
2) straight alongside the tablet for more smaller footprint on the wall

fit very perfect for the tablet with a case (the more elegant ones not rigid ones), so can leave your case on. (i upload a photo of the tablet with the case for reference)

i upload solidworks files for people who want to change measurement for there own tablet.
but since it was designed for Tab s7 (plus) it should fit to all the Samsung ones.

best way to print it when laying flat and not standing for more strength
25% and up should be fine but feel more safety with 100%

Ender 3v2

Tablet wall hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5324062.

pic18f45k22 enclosure, for the hinge M4 screw supposed to fit or you can push a rod through it. 40mm long rod is fine, for the screw take longer.

because this board have a static electricity problems the base design calculated with an anti-static bubble-wrap under it (for the top just stick it there and everything is fine). 

i added the .sldprt file so you can add your name/writting on the base walls or the top of the lid. the file is a bit messy since solidworks gave me a crap so i did it the long way.

support is not needed but for the lid hinge it can help for rigidity, and for the holes in the base. but really it depend on your printer ability.

Ender 3v2


pic18f45k22 enclosure

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5382169.

key caps for redragon keyboard, i have the k539, but i belive it will fot yo mor redragon keybords, i upload the solidworks files so you can customize it as you want. or if you want to go for the bigger keys.
note that longer keys may have more then one cross behind.

the long one is for the alt, win, ctrl size keys
ant the regular is for every ractangular key

the one that i made is:
1) Deathly hallows to replace the up arrow
2) 2 alt with a man running throw a portal

it came out very nice and in white or very bright material you can actually still keep enjoy the RGB of the keyboard 

printed on Ender 3v2

Redragon Key cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4926136.

a simple headphone hanger, designed to avoid ruining headphone head cushion.

seat perfect on this foldable hook: https://www.thingiverse.com/thing:4675334

NO support for the main part, but the clips need support.
you don't need the clips if the headphones doesn't slip.
recommended to put some cloth on it to make more friction so you don't need the clips.
(my headphones have some metal part where it touch so it slips).


Headphones hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5382229.

best for xiaomi remote control for mi box 3 (the one withe the less buttons)
so you can touch all the buttons without taking it out of the holder.

second one is for the lazy people like me :) who want to take it out from time to time but don't want to look when putting it back' so you have those "ears" to guide your hand and the remote itself in.

there is holes for screws if double sided tape won't hold.

Ender 3v2

remote control holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

matanelav