Charms / KeyChain Charm BUNDLE! - 28 HIGH QUALITY GUN CHARMS & KEY CHAIN CHARMS!

This 28 FILE BUNDLE of keycharms/charm is perfect if you are a fan of anything related to super heroes, guns, video games, etc. There is a big variety here!

Crafted with great attention to detail, this keycharm/charm STL file will help you create a truly one-of-a-kind accessory that will stand out from the rest. It is compatible with a wide range of 3D printers and printing software, so you can easily bring your design to life.

Whether you are looking for a cool accessory for your keys or a unique gun charm to add to your collection, this STL file is the perfect solution.

And if you are interested in purchasing the entire bundle pack for all our keycharms/charms, feel free to visit
"Insert here".

Visit my patreon, to help support us, and what we do! Some designs posted on our Cults3d page, can also be found on our Patreon with a commercial license to legally sell them in physical/printed form.

patreon.com/user?u=65682433

• THESE MODELS ARE HAVE BEEN TEST PRINTED IN PLA / PLA+ -

Keychains, Gun charms, Keychain bundles, Gun charm bundles, Custom keychains, Rifle charms, Pistol charms, Shotgun charms, Bullet charms, Ammo charms, Firearms accessories, Hunting keychains, Shooting keychains

• THESE MODELS ARE HAVE BEEN TEST PRINTED IN PLA -

Temperature: PLA filament typically prints best between 190-220°C. Start with 200°C and adjust it up or down based on your results.

Bed Temperature: PLA doesn't require a heated bed, but if your printer has one, set it between 50-60°C.

Print Speed: PLA prints best at slower speeds. Start with a speed of 30-50 mm/s and adjust as needed.

Layer Height: A layer height of 0.2-0.3mm is recommended for PLA.

Infill Density: A 20-30% infill density is sufficient for most prints.

Cooling: PLA requires good cooling to prevent warping and improve print quality. Ensure that your printer's fan is working properly.

Retraction: PLA requires minimal retraction, usually around 1-2mm.