Boomerang from the Suicide Squad Kill the Juastice League 3D print model

Captain Boomerang uses one of several of his weapons, a boomerang. Made in blue with yellow markings on the body of the boomerang, with cord winding on the handle at the base.

When creating this model, I relied on screenshots from the game. By scaling screenshots of the gameplay process, I got the size and dimensions of the boomerang. The model is worked out to the smallest detail and corresponds to the boomerang that we saw in the game.

The model is easy to print. The details of the model are designed in such a way that they can be printed on printers with a small print area.

I also took into account the possibility of printing individual parts with colored plastic, in colors corresponding to the colors of the original parts.

After printing, this boomerang will not cause any problems when assembling. I am attaching the schematic diagram. On it, you can easily assemble it. When assembling in parts, a metal rod with a diameter of 4 mm must be used. If you do not want to print in parts, it is possible to print in one piece.

After printing, assembling and painting, it is necessary to wind the cord on the handle, as it was done on the boomerang from the game.

It will take its rightful place in your collection or complement your cosplay look.

Model dimensions:

• length – 506 мм
• height – 256 мм
• width – 28 мм

The model consists of:

Ver1 - whole boomerang, not divided into parts Ver2 - boomerang divided into 6 parts for printing

Separately, taking into account printing on printers with a small print area. But you can split it yourself as you need. The model file is attached in one piece.

Parts: black_panel1,black_panel2,blade,body_prt1,body_prt2,body_prt3

Formats: .OBJ .STL .SAT .STEP .XB .XT .IGS .SLDPRT