Dragon head Dice tower

Dragons are majestic creatures known for their strength and wisdom. Now you can have your own dragon to help you with your dice rolls!

This 3D-printed dice tower is made from a toothy dragon head that sits on a rock. The die is thrown into the open mouth of the dragon and comes out of the hole in the rock. The spaces for the dice are large enough to accommodate even larger dice than the classic ones.

This dice tower is a great addition for any board game or RPG player, such as D&D.

If you want your dice to always fall in the right place, then this dice tower is the right choice for you!

After printing the tower, you can also print a fence that fits into the bottom hole where the dice come out. This will prevent the dice from flying all over the table.

With this dice tower and fence, your dice will always be under control!

So what do you say, will you have your own dragon to help you with your dice rolls?

Now for free here:
https://makerworld.com/cs/models/113511

I personally printed this tower without supports, but it can be seen on one of the dragon's horns, so I recommend using supports in these places, but you will definitely see it yourself in your slicer.

I glued the fencee to the rock after printing, but it's not necessary.

Printing time: 11 hours +-
Nozzle: 0.4
Layer height: 0.28
Infill: 15%