Swedish tank destroyer collection

This collection contains four of the most prominent Jagdpanzers from the Swedish tank production. Sweden prioritized the construction of Jagdpanzers to have a better defense against their opponents, as Jagdpanzers are ideal for defending and holding important positions. The following four tanks are included:

Stridsvagn 103:

The Stridsvagn was a Swedish tank that remained in service until 1997 and never saw action. With its 1.90m it is one of the lowest tanks and with the cannon built into the hull a unique tank.

About the model:

The STL files include several printing options of the Stridsvagn 103, all of which are based on a scale of 1:100.

Included are a version with front shovel and one without.

Infanterikanonvagn 72:

The Infanterikanonvagn 72 was a tank produced by Sweden in the early 1950s. It was equipped with a 75mm cannon and weighed 8 tons.

From 1953 to 1954, a total of 36 Ikv 72s were delivered to the Swedish Army.

About the model:

The STL files include several printing options of the Ikv 72, all of which are based on a scale of 1:100.

Infanterikanonvagn 103:

The Infanterikanonvagn 103 was a tank produced by Sweden at the end of the 1950s. It was equipped with a 105mm cannon and weighed 8.8 tons.

A total of 81 Ikv 103s were delivered to the Swedish Army in the 1960s.

Udes 03:

The Udes 03 was a prototype tank of the Swedish Army during the 1970s. During this period, several Swedish companies were researching a concept for a turretless tank destroyer. Various prototypes were designed by Udes, such as the object 2013 A, which was a smaller version of the Stridsvagn 103, with the small difference of having a vertically moving cannon that could move down or up independently of the turret. This idea gave rise to the Udes 03 concept, among others.

About the model:

The STL files include several printing options for the Udes 03, all of which are based on a scale of 1:100.

Test models were printed with a layer height of 0.12 mm, but other layer heights can also be tried out.

Stridsvagn 103:

Supports are needed for the hull of the tank, for the rear part of the turret and for a small part of the tracks.

Infanterikanonvagn 103/72:

Supports are required for the hull of the vehicle.

Udes 03:

Supports are not required for this model.

Filling does not matter, from 5% the model should be stable enough for tabletop use.