Landscape Edging Nails / Spikes

Popular landscape No-Dig Edging kits never come with enough of the nails/spikes that hold them into the ground. Yes, you can buy extras (at about a dollar or more for each nail/spike). Or, you can just print some more! I can easily fit thirteen on the buildplate of my Ender 3s, and with printing them with Jayo PLA+ they only cost me about 15 cents each. With a .6 nozzle at .32 layer height a full plate of 13 takes a little over nine hours to print (and you can cut that down to six hours if you use CHEP's Extra Fast profile, but I prefer the quality of the nine hour print). These will probably work well as tent stakes and other things too, but I have not personally tested them. (Maybe even as weapons against vampires if printed with wood filament and driven into their hearts - again, I have not tested this scenario, so proceed with extreme caution, and at your own risk . . .)

Update: I've decided to include both versions of the design in-case someone just wants to print the round one with supports (you will have to print these on their sides if you want them to be strong). Personally I only print the version with the one flat side.

CC3D PLA MAX or Jayo PLA+ filament
Temps - 215 hotend, 60 Buildplate
.6 Nozzle at .32 layer height