Mirror Plant Stand / Table (Core Setup) - part of the Reflection Stand System

This is a modular plant stand or table for any project. You can mix this up to suit your needs. Please post your remixes of Table Legs, Rims and inserts with "Reflection Stand System"

This system uses 9mm x 9mm square pins to hold the legs in place. Just sand if they don't easily press in and then a drop of super glue keeps them in place forever.

The stand and system are quite strong. It does use a 5" mirror from the dollar store for the reflection. Optionally you don't have to use the mirror and you can print the mirror.stl instead.

Everything press fits together. Print the legs on their side so the pin faces up. Nothing requires supports.

The legs attach to the ring. Then insert the Mirror into the main ring and then you print the insert of your liking. The hexagon grid comes with this model, but you can follow this link which searches thangs for new inserts.

If you would like to request an insert design, leg design, etc. you can do that through my community discord channel https://discord.gg/ZDKq5N2.

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!

No cost option to support my work?

Subscribe to the YT channel
Follow me on Thangs.com
Watch videos on the channel!
Share any of the videos on social media!
Share my models with friends and family!