PULL TOY - PULL ALONG GRASSHOPPER

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, PLUS EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

Someone in my relatives asked me if i could replicate one of his daughter's wooden toy. It was supposed to be a personnal project, but when i saw how cute this is, i tought you would be more than happy to have your own!

You can now create your very own little grasshopper to pull around the neighborhood!!!

It is very easy to print! Its a 100% supportless design, and the assembly is a piece of cake literally.

All the parts are already placed in the right orientation for printing.

HARDWARE: You will need the followings:

-4x M3x10mm screws
-6x M3x16mm screws
-A long piece of rope

DISCLAIMER: I know pull along toys are a big hit with the kids. BUT because of the small parts of this design (the eyes and the screws) i do not recommend this toy for a young toddler.

Maybe a 3yrs old+, but again, under constant parental supervision. You know your kids more than anybody else, maybe its alright with you, but be careful and keep in mind that risk. I am not responsible of how you're gonna use the print, and caution is mandatory here.

That being said, when the eyes are well glued, and the screws well tighten, the design is really strong and works very fine. After printing it, you will be able to decide if its suitable for your child or not.

Complete instructions are included as usual.

Only one part needs a color change, and its the eye. You will need to change from white to black for the pupil at the correct height.

For the Bambu Lab Owners, you will find a 3mf file with the complete project, already sliced with the right colors and ready to fire!

Have fun!