Skip to content

Tamiya King Hauler V4

DSCN0066.JPG Tamiya King Hauler V4
truck_v4_diagram.png Tamiya King Hauler V4
DSCN0015.JPG Tamiya King Hauler V4
DSCN0009.JPG Tamiya King Hauler V4
DSCN0065.JPG Tamiya King Hauler V4
DSCN0064.JPG Tamiya King Hauler V4
DSCN0010.JPG Tamiya King Hauler V4
DSCN0063.JPG Tamiya King Hauler V4
1 Speed Gear Box 540 Motor 80T 540 Motor Gear Spacer Gear A : Bearing cup Bearing cup Gear B Gear B spacer output U joint Bearing cup 3mm Shafts. 623-ZZ Bearing, 3x10x4 Tamiya King Hauler V4
truck_v4_diagram.stl Tamiya King Hauler V4
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 6.3k views
  • 20 likes
  • 239 downloads
  • 1 comment
License
3D design format
STL, TXT, and ZIP Folder details Close
  • V4.zip
    • New Text Document.txt
    • part 1/1 speed tranny/box/540 motor side.stl
    • part 1/1 speed tranny/box/550 motor side.stl
    • part 1/1 speed tranny/box/bearing cup 1 w bearing.stl
    • part 1/1 speed tranny/box/bearing cup 1.stl
    • part 1/1 speed tranny/box/bearing cup 2 print 3.stl
    • part 1/1 speed tranny/box/bearing cup 2 w bearing print 3.stl
    • part 1/1 speed tranny/box/other end.stl
    • part 1/1 speed tranny/box/spacer 1.stl
    • part 1/1 speed tranny/cover/Left.stl
    • part 1/1 speed tranny/cover/Right.stl
    • part 1/1 speed tranny/gears/540 motor gear.stl
    • part 1/1 speed tranny/gears/550 motor gear.stl
    • part 1/1 speed tranny/gears/gear B spacer.stl
    • part 1/1 speed tranny/high gear set/gear A.stl
    • part 1/1 speed tranny/high gear set/gear B spacer.stl
    • part 1/1 speed tranny/high gear set/gear B.stl
    • part 1/1 speed tranny/low gear/gear A.stl
    • part 1/1 speed tranny/low gear/gear B spacer.stl
    • part 1/1 speed tranny/low gear/Gear B.stl
    • part 1/1 speed tranny/mid gear set/gear B spacer.stl
    • part 1/1 speed tranny/mid gear set/mid gear A.stl
    • part 1/1 speed tranny/mid gear set/mid gear B.stl
    • part 1/1 speed tranny/output U joint.stl
    • part 1/diff spacers/axle spacer 1mm.stl
    • part 1/diff spacers/axle spacer 2mm.stl
    • part 1/diff spacers/spacer 1mm set.stl
    • part 1/diff spacers/spacer 2mm set.stl
    • part 1/diff spacers/Thumbs.db
    • part 1/differintuals/rear single/gear set.STL
    • part 1/differintuals/rear single/indivual parts/rear axle drive shaft.stl
    • part 1/differintuals/rear single/indivual parts/rear single housing bottom.stl
    • part 1/differintuals/rear single/indivual parts/rear single housing top.stl
    • part 1/differintuals/rear single/indivual parts/Truck_V4_Axle_Diff_Gear1.STL
    • part 1/differintuals/rear single/indivual parts/Truck_V4_Axle_Diff_Gear2.STL
    • part 1/differintuals/rear single/indivual parts/Truck_V4_Axle_Ujoint.STL
    • part 1/differintuals/rear single/rear single housing set.stl
    • part 1/differintuals/rear tandom/gear set.STL
    • part 1/differintuals/rear tandom/indivual parts/rear axle drive shaft.stl
    • part 1/differintuals/rear tandom/indivual parts/rear tandom housing bottom.stl
    • part 1/differintuals/rear tandom/indivual parts/rear tandom housing top.stl
    • part 1/differintuals/rear tandom/indivual parts/Truck_V4_Axle_Diff_Gear1.STL
    • part 1/differintuals/rear tandom/indivual parts/Truck_V4_Axle_Diff_Gear2.STL
    • part 1/differintuals/rear tandom/indivual parts/Truck_V4_Axle_Ujoint.STL
    • part 1/differintuals/rear tandom/rear tandom housing set.stl
    • part 1/differintuals/Thumbs.db
    • part 1/drive shafts/coupler.stl
    • part 1/drive shafts/shaft A1 print 2.stl
    • part 1/drive shafts/shaft A2.stl
    • part 1/drive shafts/shaft A3.stl
    • part 1/drive shafts/shaft B1.stl
    • part 1/drive shafts/shaft B2.stl
    • part 1/drive shafts/shaft B3.stl
    • part 1/drive train/check list suspension.txt
    • part 1/drive train/cross set.STL
    • part 1/drive train/other indivual parts/axle spacer 1mm.stl
    • part 1/drive train/other indivual parts/axle spacer 2mm.stl
    • part 1/drive train/other indivual parts/Truck_V4_Ujointshaft_Ujoint_Cross.STL
    • part 1/drive train/spacer 1mm set.stl
    • part 1/drive train/spacer 2mm set.stl
    • part 1/drive train/Thumbs.db
    • part 1/fender rear/fender back side.stl
    • part 1/fender rear/fender bracket.stl
    • part 1/fender rear/fender front side.stl
    • part 1/fender rear/Thumbs.db
    • part 1/front axle/Axle wheel shaft.stl
    • part 1/front axle/axle.stl
    • part 1/front axle/bottom bolt down.stl
    • part 1/front axle/hub.stl
    • part 1/front axle/new front end exploded.stl
    • part 1/front axle/spring.stl
    • part 1/front axle/top bolt down.stl
    • part 1/hitch/hitch base plate.stl
    • part 1/hitch/hitch top parts.stl
    • part 1/hitch/indivual parts/hitch plate hinge.stl
    • part 1/hitch/indivual parts/hitch plate.stl
    • part 1/hitch/indivual parts/hitch relese arm.stl
    • part 1/hitch/indivual parts/hitch relese mech.stl
    • part 1/interior/indivual parts/interior base.stl
    • part 1/interior/indivual parts/seat base.stl
    • part 1/interior/indivual parts/seat.stl
    • part 1/interior/indivual parts/stearing wheel.stl
    • part 1/interior/interior base set.stl
    • part 1/interior/seat set.stl
    • part 1/interior/Thumbs.db
    • part 1/king hauler body/air filter set.stl
    • part 1/king hauler body/battery box 11 volts.stl
    • part 1/king hauler body/battery box 7 volts.stl
    • part 1/king hauler body/battery box new.stl
    • part 1/king hauler body/battery box straps.stl
    • part 1/king hauler body/bumper back.stl
    • part 1/king hauler body/bumper front.stl
    • part 1/king hauler body/cab floor 2-28-2022.stl
    • part 1/king hauler body/cab tool box step with switches.stl
    • part 1/king hauler body/cab tool box step.stl
    • part 1/king hauler body/check list body.txt
    • part 1/king hauler body/exaust set.stl
    • part 1/king hauler body/front turn housing.stl
    • part 1/king hauler body/fuel tank center.stl
    • part 1/king hauler body/fuel tank end cap.stl
    • part 1/king hauler body/grab bar set.stl
    • part 1/king hauler body/grill.stl
    • part 1/king hauler body/gt power box.stl
    • part 1/king hauler body/indivual parts/air filter pasanger.stl
    • part 1/king hauler body/indivual parts/air filter R.stl
    • part 1/king hauler body/indivual parts/battery box strap.stl
    • part 1/king hauler body/indivual parts/bumper back light lens.stl
    • part 1/king hauler body/indivual parts/exaust stack.stl
    • part 1/king hauler body/indivual parts/fender turns lens.stl
    • part 1/king hauler body/indivual parts/fender turns.stl
    • part 1/king hauler body/indivual parts/flattened wiper left.stl
    • part 1/king hauler body/indivual parts/flattened wiper right.stl
    • part 1/king hauler body/indivual parts/grab bar.stl
    • part 1/king hauler body/indivual parts/hitch hitch pivit.stl
    • part 1/king hauler body/indivual parts/hitch hitch plate.stl
    • part 1/king hauler body/indivual parts/hitch release lever.stl
    • part 1/king hauler body/indivual parts/hitch release.stl
    • part 1/king hauler body/indivual parts/king hauler cab bumper front lens.stl
    • part 1/king hauler body/indivual parts/king hauler cab fender mud flap arm.stl
    • part 1/king hauler body/indivual parts/king hauler cab fender mud flap back plate.stl
    • part 1/king hauler body/indivual parts/king hauler cab head light lens.stl
    • part 1/king hauler body/indivual parts/king hauler cab hitch release link.stl
    • part 1/king hauler body/indivual parts/lens back bumper.stl
    • part 1/king hauler body/indivual parts/lens fender turns.stl
    • part 1/king hauler body/indivual parts/lens front bumper.stl
    • part 1/king hauler body/indivual parts/lens round turn and flood.stl
    • part 1/king hauler body/indivual parts/lense head light.stl
    • part 1/king hauler body/indivual parts/mirror sides.stl
    • part 1/king hauler body/indivual parts/new batter door latch.stl
    • part 1/king hauler body/indivual parts/new battery door latch back.stl
    • part 1/king hauler body/indivual parts/Thumbs.db
    • part 1/king hauler body/king hauler cab fender mud flap set.stl
    • part 1/king hauler body/lense set.stl
    • part 1/king hauler body/mirror sides set.stl
    • part 1/king hauler body/new batter door latch set.stl
    • part 1/king hauler body/new battery door.stl
    • part 1/king hauler body/new cab.stl
    • part 1/king hauler body/new hood.stl
    • part 1/king hauler body/new sleeper.stl
    • part 1/king hauler body/power plate.stl
    • part 1/king hauler body/roof lights compleat.stl
    • part 1/king hauler body/Sleeeper Wind Screen.stl
    • part 1/king hauler body/sleeper floor.stl
    • part 1/king hauler body/Thumbs.db
    • part 1/king hauler body/wheel well L.stl
    • part 1/king hauler body/wheel well R.stl
    • part 1/king hauler body/window screen.stl
    • part 1/king hauler body/windows/driver side open.stl
    • part 1/king hauler body/windows/front driver open.stl
    • part 1/king hauler body/windows/front passanger open.stl
    • part 1/king hauler body/windows/passanger side open.stl
    • part 1/king hauler body/wiper blades.stl
    • part 1/lenses/amber lenses/front turn.stl
    • part 1/lenses/amber lenses/tear drop roof lense set.stl
    • part 1/lenses/amber lenses/tear drop roof lense.stl
    • part 1/lenses/amber lenses/turn signals set.stl
    • part 1/lenses/clear lenses/clear set.stl
    • part 1/lenses/clear lenses/front bumper.stl
    • part 1/lenses/clear lenses/headlight.stl
    • part 1/lenses/red lenses/tail light set.stl
    • part 1/lenses/red lenses/tail light.stl
    • part 1/new diffs 7-5 bearings/differantal front dual bottom.stl
    • part 1/new diffs 7-5 bearings/differantal front dual top.stl
    • part 1/new diffs 7-5 bearings/differantal front single bottom.stl
    • part 1/new diffs 7-5 bearings/differantal front single top.stl
    • part 1/new diffs 7-5 bearings/differental rear single bottom.stl
    • part 1/new diffs 7-5 bearings/differental rear single top.stl
    • part 1/new diffs 7-5 bearings/differental rear tandom bottom.stl
    • part 1/new diffs 7-5 bearings/differental rear tandom top.stl
    • part 1/new split ball stearing links/new linkage ball.stl
    • part 1/new split ball stearing links/new stearing link.stl
    • part 1/new split ball stearing links/new tie rod.stl
    • part 1/new split ball stearing links/stearing horn.stl
    • part 1/new tires and rims/highway tire new front rim inside.stl
    • part 1/new tires and rims/highway tire new front rim outside.stl
    • part 1/new tires and rims/highway tire new rim dulley inside.stl
    • part 1/new tires and rims/highway tire new rim dulley outside.stl
    • part 1/new tires and rims/highway tire new rim dulley spacer.stl
    • part 1/new tires and rims/highway tire new.stl
    • part 1/no longer used/50mm micro shock/50mm micro shock ball joint bottom set.stl
    • part 1/no longer used/50mm micro shock/50mm micro shock ball joint top set.stl
    • part 1/no longer used/50mm micro shock/50mm micro shock diagram.stl
    • part 1/no longer used/50mm micro shock/bottom nut set.stl
    • part 1/no longer used/50mm micro shock/check list micro shock.txt
    • part 1/no longer used/50mm micro shock/cylinder set.stl
    • part 1/no longer used/50mm micro shock/DSCN0311.JPG
    • part 1/no longer used/50mm micro shock/indivual parts/50mm micro shock ball joint bottom.stl
    • part 1/no longer used/50mm micro shock/indivual parts/50mm micro shock ball joint top.stl
    • part 1/no longer used/50mm micro shock/indivual parts/50mm micro shock bottom nut.stl
    • part 1/no longer used/50mm micro shock/indivual parts/50mm micro shock cylinder.stl
    • part 1/no longer used/50mm micro shock/indivual parts/50mm micro shock plunger.stl
    • part 1/no longer used/50mm micro shock/plunger set.stl
    • part 1/no longer used/50mm micro shock/project/50mm shock ball head top.stl
    • part 1/no longer used/50mm micro shock/project/50mm shock.rsdoc
    • part 1/no longer used/50mm micro shock old/50mm micro shock ball joint top set 6.stl
    • part 1/no longer used/50mm micro shock old/bottom nut set.stl
    • part 1/no longer used/50mm micro shock old/check list micro shock.txt
    • part 1/no longer used/50mm micro shock old/cylinder set.stl
    • part 1/no longer used/50mm micro shock old/DSCN0311.JPG
    • part 1/no longer used/50mm micro shock old/indivual parts/50mm micro shock ball joint top.stl
    • part 1/no longer used/50mm micro shock old/indivual parts/50mm micro shock ball joint.stl
    • part 1/no longer used/50mm micro shock old/indivual parts/bottom joint set.stl
    • part 1/no longer used/50mm micro shock old/indivual parts/top joint set.stl
    • part 1/no longer used/50mm micro shock old/joint ends.stl
    • part 1/no longer used/50mm micro shock old/plunger set.stl
    • part 1/no longer used/50mm micro shock old/project/50mm shock ball head top.stl
    • part 1/no longer used/50mm micro shock old/project/50mm shock.rsdoc
    • part 1/no longer used/diff front single/diff front drive shaft.stl
    • part 1/no longer used/diff front single/diff front input gear.stl
    • part 1/no longer used/diff front single/diff front single/diff front drive shaft.stl
    • part 1/no longer used/diff front single/diff front single/diff front input gear.stl
    • part 1/no longer used/diff front single/diff front single/diff front single axle ujoint.stl
    • part 1/no longer used/diff front single/diff front single/diff front single axle ujoint 2.stl
    • part 1/no longer used/diff front single/diff front single/diff front single case bottom.stl
    • part 1/no longer used/diff front single/diff front single/diff front single case top.stl
    • part 1/no longer used/diff front single/diff front single/diff front single spring bolt down.stl
    • part 1/no longer used/diff front single/diff front single/diff front single spring.stl
    • part 1/no longer used/diff front single/diff front single/diff front single stearing linkage.stl
    • part 1/no longer used/diff front single/diff front single/diff front single wheel hub 1.stl
    • part 1/no longer used/diff front single/diff front single/diff front single wheel hub 2.stl
    • part 1/no longer used/diff front single/diff front single/diff front spider gear.stl
    • part 1/no longer used/diff front single/diff front single axle ujoint.stl
    • part 1/no longer used/diff front single/diff front single axle ujoint 2.stl
    • part 1/no longer used/diff front single/diff front single case bottom.stl
    • part 1/no longer used/diff front single/diff front single case top.stl
    • part 1/no longer used/diff front single/diff front single spring bolt down.stl
    • part 1/no longer used/diff front single/diff front single spring.stl
    • part 1/no longer used/diff front single/diff front single stearing linkage.stl
    • part 1/no longer used/diff front single/diff front single wheel hub 1.stl
    • part 1/no longer used/diff front single/diff front single wheel hub 2.stl
    • part 1/no longer used/diff front single/diff front single.zip
    • part 1/no longer used/diff front single/diff front spider gear.stl
    • part 1/no longer used/drag linkage.stl
    • part 1/no longer used/front singlenot used/front axle wheel hub set.stl
    • part 1/no longer used/front singlenot used/front axle works set.stl
    • part 1/no longer used/front singlenot used/single parts/front axle axle gear.stl
    • part 1/no longer used/front singlenot used/single parts/front axle drive shaft.stl
    • part 1/no longer used/front singlenot used/single parts/front axle finle output u joint.stl
    • part 1/no longer used/front singlenot used/single parts/front axle input gear.stl
    • part 1/no longer used/front singlenot used/single parts/front axle output u joint.stl
    • part 1/no longer used/front singlenot used/single parts/front axle u joint.stl
    • part 1/no longer used/front singlenot used/single parts/front axle wheel hub 1.stl
    • part 1/no longer used/front singlenot used/single parts/front axle wheel hub 2.stl
    • part 1/no longer used/front singlenot used/Thumbs.db
    • part 1/no longer used/front tandom not used hear/front axle stearing linkage.stl
    • part 1/no longer used/front tandom not used hear/front axle wheel hub set.stl
    • part 1/no longer used/front tandom not used hear/front axle works set.stl
    • part 1/no longer used/front tandom not used hear/front tandom case bottom.stl
    • part 1/no longer used/front tandom not used hear/front tandom case top.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle axle gear.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle drive shaft.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle finle output u joint.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle input gear.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle output u joint.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle u joint.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle wheel hub 1.stl
    • part 1/no longer used/front tandom not used hear/single parts/front axle wheel hub 2.stl
    • part 1/no longer used/front tandom not used hear/Thumbs.db
    • part 1/no longer used/linkage adjustable not used/adjustable set.stl
    • part 1/no longer used/linkage adjustable not used/indivual parts/ball head.stl
    • part 1/no longer used/linkage adjustable not used/indivual parts/lock nut.stl
    • part 1/no longer used/linkage adjustable not used/indivual parts/long nut.stl
    • part 1/no longer used/linkage adjustable not used/indivual parts/rod.stl
    • part 1/no longer used/old stearing link.stl
    • part 1/no longer used/turn housing.stl
    • part 1/no longer used/window driver side.stl
    • part 1/no longer used/window front driver.stl
    • part 1/no longer used/window front pasanger.stl
    • part 1/no longer used/window frount driver.stl
    • part 1/no longer used/window frount pasanger.stl
    • part 1/no longer used/window open driver.stl
    • part 1/no longer used/window pasanger side.stl
    • part 1/no longer used/window set.stl
    • part 2/1mm washer.stl
    • part 2/bearing.stl
    • part 2/decal rescaled.psd
    • part 2/hitch exploded.stl
    • part 2/hitch springs.stl
    • part 2/pictures/DSCN0009.JPG
    • part 2/pictures/DSCN0010.JPG
    • part 2/pictures/DSCN0015.JPG
    • part 2/pictures/DSCN0063.JPG
    • part 2/pictures/DSCN0064.JPG
    • part 2/pictures/DSCN0065.JPG
    • part 2/pictures/DSCN0066.JPG
    • part 2/suspension/front/indivual parts/shakle left back.stl
    • part 2/suspension/front/indivual parts/shakle left front.stl
    • part 2/suspension/front/indivual parts/shakle right back.stl
    • part 2/suspension/front/indivual parts/shakle right front.stl
    • part 2/suspension/front/indivual parts/spring front.stl
    • part 2/suspension/front/indivual parts/spring hold down plate.stl
    • part 2/suspension/front/indivual parts/suspension front spring.stl
    • part 2/suspension/front/spring hold down plate.stl
    • part 2/suspension/front/suspension front shakle set.stl
    • part 2/suspension/front/suspension front spring. set.stl
    • part 2/suspension/front/Thumbs.db
    • part 2/suspension/rear/indivual parts/suspension rear brace.stl
    • part 2/suspension/rear/indivual parts/suspension rear mount bracket.stl
    • part 2/suspension/rear/indivual parts/suspension rear spring.stl
    • part 2/suspension/rear/shock mount.stl
    • part 2/suspension/rear/suspension rear brace set.stl
    • part 2/suspension/rear/suspension rear mount bracket set.stl
    • part 2/suspension/rear/suspension rear spring set.stl
    • part 2/suspension/shocks 50mm new seperate ball/50mm micro shock diagram.stl
    • part 2/suspension/shocks 50mm new seperate ball/ball head bottom.stl
    • part 2/suspension/shocks 50mm new seperate ball/ball head top.stl
    • part 2/suspension/shocks 50mm new seperate ball/ball.stl
    • part 2/suspension/shocks 50mm new seperate ball/bottom nut.stl
    • part 2/suspension/shocks 50mm new seperate ball/cylinder.stl
    • part 2/suspension/shocks 50mm new seperate ball/plunger.stl
    • part 2/suspension/Thumbs.db
    • part 2/things to print SLA/air filter set.stl
    • part 2/things to print SLA/bumpers/front 1.stl
    • part 2/things to print SLA/bumpers/front 2.stl
    • part 2/things to print SLA/bumpers/rear 1.stl
    • part 2/things to print SLA/bumpers/rear 2.stl
    • part 2/things to print SLA/exaust stack split for sla printer/exaust main body.stl
    • part 2/things to print SLA/exaust stack split for sla printer/exaust stack.stl
    • part 2/things to print SLA/exhaust set.stl
    • part 2/things to print SLA/front turn housing.stl
    • part 2/things to print SLA/Fuel Tanks & Tool boxes/cab tool box step with switches.stl
    • part 2/things to print SLA/Fuel Tanks & Tool boxes/cab tool box step.stl
    • part 2/things to print SLA/Fuel Tanks & Tool boxes/fuel tank center, print 2 .stl
    • part 2/things to print SLA/Fuel Tanks & Tool boxes/fuel tank end cap, print 4 .stl
    • part 2/things to print SLA/grab bar set.stl
    • part 2/things to print SLA/grill guard/end left.stl
    • part 2/things to print SLA/grill guard/end right.stl
    • part 2/things to print SLA/grill guard/middle left bottom.stl
    • part 2/things to print SLA/grill guard/middle left top.stl
    • part 2/things to print SLA/grill guard/middle right bottom.stl
    • part 2/things to print SLA/grill guard/middle right top.stl
    • part 2/things to print SLA/grill guard/mounting bracket.stl
    • part 2/things to print SLA/grill guard/round left.stl
    • part 2/things to print SLA/grill guard/round right.stl
    • part 2/things to print SLA/grill guard/top round.stl
    • part 2/things to print SLA/indivual parts/air filter, driver side.stl
    • part 2/things to print SLA/indivual parts/air filter, Passenger side .stl
    • part 2/things to print SLA/indivual parts/grab bar.stl
    • part 2/things to print SLA/indivual parts/rear view mirror.stl
    • part 2/things to print SLA/indivual parts/turn housing.stl
    • part 2/things to print SLA/Rear fenders/fender back side, print 2 .stl
    • part 2/things to print SLA/Rear fenders/fender bracket, print 2 .stl
    • part 2/things to print SLA/Rear fenders/fender front side, print 2 .stl
    • part 2/things to print SLA/Rear fenders/king hauler cab fender mud flap arm.stl
    • part 2/things to print SLA/Rear fenders/king hauler cab fender mud flap back plate.stl
    • part 2/things to print SLA/Rear fenders/king hauler cab fender mud flap set.stl
    • part 2/things to print SLA/Rear fenders/Thumbs.db
    • part 2/things to print SLA/rear view mirror set.stl
    • part 2/things to print SLA/roof set.stl
    • part 2/things to print SLA/window screen.stl
    • part 2/Thumbs.db
    • part 2/truck v2.txt
    • part 2/truck v4 diagram.stl
    • part 2/v4 frame/cross support.stl
    • part 2/v4 frame/frame 1 left.stl
    • part 2/v4 frame/frame 1 right.stl
    • part 2/v4 frame/frame 2 left.stl
    • part 2/v4 frame/frame 2 right.stl
    • part 2/v4 frame/frame 3 left.stl
    • part 2/v4 frame/frame 3 right.stl
    • part 2/v4 frame/new frame back.stl
    • part 2/v4 frame/new frame front.stl
    • part 2/v4 frame/new front bumper bracket.stl
    • part 2/v4 frame/new rear bumper bracket.stl
    • pictures/DSCN0009.JPG
    • pictures/DSCN0010.JPG
    • pictures/DSCN0015.JPG
    • pictures/DSCN0063.JPG
    • pictures/DSCN0064.JPG
    • pictures/DSCN0065.JPG
    • pictures/DSCN0066.JPG
    • truck v4 diagram.stl
  • instruction upgrade.zip
    • special instructions.txt
  • special instructions.txt
  • truck_v4_diagram.stl

Learn more about the formats
Last update 2022-05-21 at 06:22
Publication date 2022-05-06 at 23:02
?
Published to Thingiverse on: 2022-05-06 at 19:27
Design number 717042
ajory

ajory

3D printer file info

3D model description

Tamiya King Hauler V4

This is a Kiss or keep it simple version.

I have not finished the electronics in this truck because I already have my purchased and other trucks,this build is strictly for
every body else.

This is my favorite truck now out of all of the version I think this is the cats meww.

The motor for the v2 is next to impossible to find now so this is to replace the V2 with a simple version using the 540 90t motor.

I am happy to report as of this post the GT power old sound board can still be found on ebay from china but still available,the price has dropped back down to a reasonable price again to around $80

I have removed the front wheel drive for a standard front.
I have taken the tamiya 3 speed and made it a 1 speed that you can choose between the 3 gear sets when you build
I have added the sleeper wind screen and cab sun visor
I have reworked the tires and rims so that they now have tabs to align the wheels with the rims and only the center screw is required to hold them together with out slipping

the gear box I have reworked the gears while the tamiya 3 speed worked I have discovered that the gears was at different gear spacing for matching gears and did not mesh well.

I have made the decals there are 2 pages the main decals needs to be printed on white water slide,the sleeper decals needs to be printed using clear water slide.
I have also reworked the gears in the 3speed and will post soon

3D printing settings

-

Categories

All designs β€Ί Game β€Ί RC vehicles

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.