This is my first major design-build, so be kind would love some comments. I took the inspiration from many different designs I have seen all over the web.
The pullies are all GT2 toothed pullies with 5mm bore. the belts are standard belts (size to be added once I measure)
All screws are 0.8mm diameter thread (more details to follow)
The drive space is a 3v gearbox motor dc motor that mounts into the supercharger, this can be linked to your RC control to make the pullies move. there is also mounts and space in teh intake for a micro server to be mounted to opperate the flaps
All bearings are 10mm diameter with a 5mm bore, 4 plain bearings that go into the back of the block 1 plain bearing in the supercharger face 4 flanged bearings that go into the front face
Print Settings Filament - PLA Extruder @ 195 deg c Build plate @ 50 deg c Layer height @ 0.095 mm Infill @ 20% Exturder was a 0.2mm diameter
THis was a old commission and I have been paid hansomly for so i share it now for free.... ENJOY