BIKE HANGER

This is a lovely bike hanger.

The hanger can be used for keys or any other light materials.

Please feel free to get in touch via email: keybisdesign@gmail.com

There are four options for your hanger; with hangers ready to stick to wall (1), without hangers ready to stick to wall (2), with hangers ready to screw into wall (3), without hangers ready to screw into wall (4).

1- If you want to have hangers on their own and stick the wall with double-sided tape without drilling:
cycling_adhesive_with_hangs.stl

(You only need double-sided type or any other glue)

2- If you want to use metal hangers on their own and stick the wall with double-sided tape without drilling:
cycling_adhesive_without_hangs.stl

(You need 5 tiny hangers and double-sided type or any other glue)

3- If you want to have hangers on their own and attach it by drilling into the wall:
cycling_drill_with_hangs.stl

(You need to drill your wall and 2 screws to attach it)

4- If you want to use metal hangers on their own and attach it by drilling into the wall:
cycling_drill_without_hangs.stl

(You need to drill your wall, 2 screws to attach it, and 5 tiny hangers)

Enjoy!

Notice: All rights reserved (CC BY-NC-ND). Designs can be used for personal use only. For commercial use, you can contact us via e-mail.

The prototype is produced by Creality Ender 3 v2.

x axis scaled by 95% (190 mm)
y axis scaled by 95% (133.8832 mm)
z axis scaled by 100% (18.5 mm)

Layer height: 0.2 mm.
Initial layer height: 0.3 mm.
Line width: 0.4 mm.
Initial layer line width: 150%

Printing temperature: 200 Celcius Degree (°C).
Printing temperature initial layer: 220 °C.
Build plate temperature: 60 °C.

Print speed: 50 mm/s
Initial layer speed: 20 mm/s

Ultimaker Cura Standart Quality - 0.2mm default settings are used for other options.