Father's Day is here!
Celebrate your dad by gifting him this special statue showing a caring Papa Bear staying by his Little Bear's side, just like every dad does with their children.
Wishing a very Happy Father's Day to all the special Papa (Bear) of the world!
(The stl is divided in 3 parts: Base, Lil Bear and Mama Bear. There is also a bonus Base without the text, if you want to print it as a simple statue)
3D PRINTING SETTINGS:
. 3D Printer: Geeetech A10 (Papa and Little Bear) / Anycubic Mega S (Base) . Nozzle: 0.4 mm . Slicer: Cura 4.9.1 . Layer height: 0.2 mm (0.8 mm wall thickness; 3 top/bottom layers) . Infill : 10% . No support needed (the Papa Bear don't actually need supports, but you can use them if you want to have a slightly cleaner print around his head; you might also use them for the Little Bear and put them under his cheek). Printing Temperature: 198°C / Build Plate Temperature: 60°C . Print speed: 60 mm/sec / Outer Wall Speed: 30mm . Filament: Brown PLA . Papa Bear - 8.4 x 8.58 x 10.3 cm ; Little Bear - 4.66 x 4.44 x 5.23 cm ; Base - 12.48 x 12.48 x 8 cm (X,Y,Z)