Star Wars Enfys Nest Skyblade 330 from Han Solo Movie 3D print model

This model and all those that will come in this series are specially dedicated to my friend NAZRAC.

This is the Enfys Nest Skyblade 330 bike from Han Solo movie, it is designed as a kit to assemble, it contains 85 pieces and the scale, as it is in the STL files is 1/12 , 21 inch long ( 55 cmts), it is very similar to the size of the black series.. It requires a certain level of knowledge in the assembly of scale models, some pieces will require a bit of sanding to fit due to tolerances. I do not have an assembly manual, but the kit design makes the assembly quite straight. The only pieces that are missing are the cables that run along the sides of the vehicle because it would be much more convenient to imitate them with real ones .
Enfys is the leader of a band of thieves called Cloud Riders, they use several custom bikes, my plan is to make them all, there are 4 different models and there could be a fifth, I am currently finishing designing the second model, The Skyblade 221, which is the one with the sidecar. You can see the progress in this forum.

https://www.therpf.com/forums/threads/1-12-3d-printed-cloud-riders-skyblade-221-from-han-solo-movie.339798/

The finished model that appears in the reference photos is the one I made for myself, I always print and assemble my models before putting them on sale to check how it fits. In this case, you should not have major problems to make it look like the photos or better. In this post, you will be able to see the steps that I carry out for the assembly and completion of the model, including the paints that I use.

https://www.therpf.com/forums/threads/1-12-3d-printed-enfys-nest-skyblade-330-from-han-solo-movie-finished.339227/page-3#post-5210368

Attached with the STLs, I add a text file with some recommendations.