CyberBase System Straight Tracks and Pillar Free 3D print model

Got a new Omega Supreme lately (and what a great piece he is!), just had to extend the playability by coming up with some additional tracks. Should be useful for other bases coming our way too!

So this very first set just comes with a standard Straight Track and Pillar piece to bring the height to that of Omega Supreme's.

And of course, there are a couple of 5mm holes and 3mm pegs to allow for standard accessories and siege effects to be added respectively!

To allow for easier and faster printing, the WFC-compatible connector is designed as a separate piece. This will allow it to be printed in higher resolution setting quickly, while the other parts can be printed on a faster setting. The track and pillar should not require supports if printed lying down and vertically respectively.

More parts for this set will be coming soon, so do keep an eye out!

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http:/www.FunbieStudios.com)

Support us on Patreon - https://www.patreon.com/FunbieStudios