Mario Cake
Mario Cake
Published 2021-03-22T16:30:22+00:00
The cake from Mario 64 appears at the end of one of the greatest games ever, Mario 64. Now let it appear in your 3D printing journey!
This cake is part of a larger project desribed in my instuctable here: https://www.instructables.com/Mario-64-Cake-Timing-Light-Game/.
Here's a video of the project in full: horizontal, vertical
Here's the wiki for the cake and reference: https://www.mariowiki.com/Cake
In short it's a timing game based on lights traveling in a circle.
The strawberries and star should be printed in clear and the rest in white if you want to complete the project as in the instructable. Otherwise print it in whatever you want to paint.
Be careful with scaling this project, the stawberries and their holes have somewhat tight tensions.
All the parts were printed on a Makergear M3 with .2 later height in PLA. The strawberries, star, cake, and base require supports and the pole does not.
Enjoy!!!
Keep support density low, i did 10%.
You'll likely want a brim for the pole, star, and strawberries.
Date published | 22/03/2021 |
Time to do | 22 - 30 minutes |