Anatomical Human Male Skull | Foundation Series
Anatomical Human Male Skull | Foundation Series
Published 2020-10-05T13:26:39+00:00
Title: The Anatomical Human Skull | The Foundation Series | The Dream of The Bovine Hill Dweller Project
Artist: Polonius
Sculpture: 3D printed wood PLA, wood stain, beeswax cream
Base: 3D printed black twinkling PLA, wood PLA, wood stain
After completion of printing the model is carefully sanded, stained, and polished with natural beeswax.
size-
Skull- H/ 64 mm
W/ 56 mm
D/ 80 mm
Base- H/ 50mm
W/ 90mm
D/ 90mm
Do you want to download more of my STL files? I welcome you to visit me on Patron where you can access all my files and more--->https://www.patreon.com/PoloniusStudios
Click here to explore all my other sites---> https://linktr.ee/Poloniusstudios
You will not need any supports for the mandible. Be careful with the skull's teeth. This is a possible problem area .If your supports are to far from the model, or the density is too low the teeth could start wobbling inside the support area.
After printing I sanded the model with 120, 180, 240, 2000 grit sandpaper. I also used some small sanding tools for hard to reach areas.
Then I stained the model with a water-based wood stain(three to four coats).
The final touch is rubbing on a wood polish. I used Japanese beeswax.
If you run into any problems please let me know.
Date published | 05/10/2020 |
Time to do | 48 - minutes |
Material Quantity | 180 |
Dimensions | 64 x 56 x 80 |
Support Free | YES |