Dometic Fridge Lock Card
Dometic Fridge Lock Card
3D
Published 2020-04-28T08:10:15+00:00
When you bring the stl into your slicer, set the size scale to 1000%. I model in Inventor and still haven't worked out why things are so off on scale, sorry!
This is the locking card for Dometic fridges in RVs. In my case, a Coachman 193BHS, for reference. These are used in the fridge door to leave it cracked open when not in use, eliminating mold growth between camping trips. Forest River wanted 13 dollars per lock card, I said no thanks and made my own.
Please note, this is a one-sided print due to the little "ramp" being on both sides on the OEM, I didn't want to print it supported so I did the ramp on one side only. If you have a right-hand opening fridge, simply mirror the part in slicer.
I used .15mm layer height, 4 perimeters, and 100% infill, in PETG.
| Date published | 28/04/2020 |
| Time to do | 48 - minutes |
| Material Quantity | 9 |
| Dimensions | 90mm x 50mm x 3mm |
| Support Free | YES |
