Plug and Play USB Arcade Spinner
Plug and Play USB Arcade Spinner
Published 2020-02-20T22:10:19+00:00
Here is an inexpensive, High quality arcade spinner. The printed parts include a mounting plate and an Arduino Pro Micro housing. Used to mount a 600p/r Incremental Rotary Encoder to your arcade control panel. The center of the plate can be popped out after the holes are drilled, leaving a mounting plate for the spinner. I've also included some spinner top spacers that can be scaled vertically, if needed, to fit your knob.
The Arduino sketch is at http://bit.ly/aw-spinner-sketch
The installation instructions include a chart for setting your MAME Dial Senstivity in each of your spinner based games.
List of parts used:
600p/r Incremental Rotary Encoder Dc5-24v 6mm Shaft
Arduino Pro Micro ATmega32U4 5V 16MHz Micro-USB Development Module Board
CNC Aluminium Alloy Volume Control Knob 6mm Hole with Set Screw
Micro USB Cable
3 - 8mm M3 screws
4 - 3/8" Phillips countersink screws
Installation instructions and MAME DIAL SETTINGS chart http://bit.ly/aw-spinner-install
Due to health issues, I'm unable to work. All donations are greatly appreciated and really help out a lot. Thank you.
Date published | 20/02/2020 |