3d printer LM8UU linear bearing 8 mm shaft gus nylon bv01 3d prind
model bv01
The LM8UU is a linear bearing used in combination with a cylindrical guide to ensure rectilinear movement.
Ideal for building 3D printers and CNC machines.
do it from nylon or a similar material
Ideal for RepRap, Prusa, Mendel, etc.
Parameters:
Inner Diameter: 8mm
Outer Diameter: 15 mm
Size: 2.4 x 1.5 cm / 0.94 x 0.59 inches
Replaces the LM8UU stock bearing, commonly used in many 3D printers
Ideally fits in the pillow block of a 3d printer. Please keep in mind the people who leave One Star reviews, they only work if your
rods are not bent. If the rods are bent, they are blocked and do not work correctly.
The model is made with much attention to details.
if you need another size make contact to me
Imprimante 3D LM8UU roulement linéaire 8 mm arbre gus nylon bv01 3d prind
modèle bv01
Le LM8UU est un roulement linéaire utilisé en combinaison avec un guide cylindrique pour assurer un mouvement rectiligne.
Idéal pour la construction d'imprimantes 3D et de machines CNC.
le faire à partir de nylon ou d'un matériau similaire
Idéal pour RepRap, Prusa, Mendel, etc.
Paramètres:
Diamètre intérieur: 8 mm
Diamètre extérieur: 15 mm
Taille: 2,4 x 1,5 cm / 0,94 x 0,59 pouces
Remplace le roulement d'origine LM8UU, couramment utilisé dans de nombreuses imprimantes 3D
S'adapte idéalement dans le bloc d'oreiller d'une imprimante 3D. Veuillez garder à l'esprit les personnes qui laissent des avis sur One Star, elles ne fonctionnent que si votre
les tiges ne sont pas pliées. Si les tiges sont pliées, elles sont bloquées et ne fonctionnent pas correctement.
Le modèle est fait avec beaucoup d'attention aux détails.
si vous avez besoin d'une autre taille contactez moi
3d drucker LM8UU linearlager 8 mm welle gus nylon bv01 3d prind
Modell bv01
Das LM8UU ist ein Linearlager, das in Kombination mit einer zylindrischen Führung für eine geradlinige Bewegung sorgt.
Ideal für den Bau von 3D-Druckern und CNC-Maschinen.
Mach es aus Nylon oder einem ähnlichen Material
Ideal für RepRap, Prusa, Mendel usw.
Parameter:
Innendurchmesser: 8mm
Außendurchmesser: 15 mm
Größe: 2,4 x 1,5 cm
Ersetzt das Lager LM8UU, das in vielen 3D-Druckern verwendet wird
Passt ideal in den Stehlager eines 3D-Druckers. Bitte denken Sie daran, dass die Leute, die One Star-Bewertungen hinterlassen, nur dann funktionieren, wenn Ihre
Stangen sind nicht gebogen. Wenn die Stangen verbogen sind, sind sie blockiert und funktionieren nicht richtig.
Das Modell ist mit viel Liebe zum Detail gefertigt.
Wenn Sie eine andere Größe benötigen, nehmen Sie Kontakt mit mir auf
Impresora 3d LM8UU rodamiento lineal eje de 8 mm gus nylon bv01 3d prind
modelo bv01
El LM8UU es un rodamiento lineal utilizado en combinación con una guía cilíndrica para garantizar el movimiento rectilíneo.
Ideal para construir impresoras 3D y máquinas CNC.
hazlo de nylon o un material similar
Ideal para RepRap, Prusa, Mendel, etc.
Parámetros:
Diámetro interno: 8 mm
Diámetro exterior: 15 mm.
Tamaño: 2.4 x 1.5 cm / 0.94 x 0.59 pulgadas
Reemplaza el rodamiento estándar LM8UU, comúnmente utilizado en muchas impresoras 3D
Idealmente cabe en el bloque de almohada de una impresora 3D. Tenga en cuenta a las personas que dejan las reseñas de One Star, solo funcionan si su
Las varillas no están dobladas. Si las varillas están dobladas, están bloqueadas y no funcionan correctamente.
El modelo está hecho con mucha atención a los detalles.
si necesitas otro tamaño ponte en contacto conmigo
Impressora 3d LM8UU rolamento linear 8 mm eixo gus nylon bv01 prind 3d
modelo bv01
O LM8UU é um rolamento linear usado em combinação com uma guia cilíndrica para garantir o movimento retilíneo.
Ideal para a construção de impressoras 3D e máquinas CNC.
faça de nylon ou de um material similar
Ideal para RepRap, Prusa, Mendel, etc.
Parâmetros:
Diâmetro interno: 8mm
Diâmetro externo: 15 mm
Tamanho: 2,4 x 1,5 cm / 0,94 x 0,59 polegadas
Substitui o rolamento de estoque LM8UU, comumente usado em muitas impressoras 3D
Ideal para o travesseiro de uma impressora 3D. Lembre-se das pessoas que deixam as resenhas do One Star; elas só funcionam se o seu
hastes não são dobradas. Se as hastes estiverem dobradas, elas estão bloqueadas e não funcionam corretamente.
O modelo é feito com muita atenção aos detalhes.
se você precisar de outro tamanho entre em contato comigo
3DプリンターLM8UUリニアベアリング8 mmシャフトガスナイロンBV01 3D Prind
モデルbv01
LM8UUは、直線運動を保証するために円筒形ガイドと組み合わせて使用されるリニアベアリングです。
3DプリンターやCNCマシンの構築に最適です。
ナイロンまたは同様の素材から
RepRap、Prusa、Mendelなどに最適
パラメーター:
内径:8mm
外径:15 mm
サイズ:2.4 x 1.5 cm / 0.94 x 0.59インチ
多くの3Dプリンターで一般的に使用されているLM8UUストックベアリングを置き換えます
3Dプリンターのピローブロックに理想的に収まります。 1つ星のレビューを残す人は、あなたが
ロッドは曲がっていません。ロッドが曲がっている場合、ロッドがブロックされ、正しく機能しません。
モデルは細部にまで注意を払って作られています。
別のサイズが必要な場合は私に連絡してください
You can make the product on a 3D printer or cnc machine from plastic, glass, clay and any materials.
the model can also be made using cnc machine turning wood.Also the model can be executions in castings.
If necessary, I can make injection molds for pouring on a separate order for an agreed payment.
The size is shown in the scetch or drawings.
the model is easily scaled to the desired size when using your 3D printing software
Render scene is not included.
Suitable for graphical projects and 3D print or cnc projects.
Everything can be seen in the photo.
the model is easily scaled in any program for printing, etc.
The model can be printed as a 3D model, as well as produced on CNC machines.
Made in solidmade, tested in the manufacture of the master model of the product.
Saving stl & obj files occurs at the average values of polygons. This is usually enough to print a model in a 3D printer,
but it may not be enough when producing a model on a CNC machine. In this case, please contact, it is possible to save files
at high values, but this will give a sharp increase in file size.
This is a fully solid-state version for 3d-print, this is not a scan version.
At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine
It is possible to model anyone another model according to your size or drawings and sketches.
ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D,Simplify3D, Cura and
anyone software applications for CNC and 3D printers.
The settings for the Cura slicer are shown for example and to understand that the slicer does not produce errors.
To print prototypes, this is usually enough to evaluate the suitability of the model for the intended image. The specific settings
should depend on your printer and the filament used for printing.
Its files For CNC Routers and 3D printers.
Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.
All copyrights to these hosted models belong to the author.
Models are placed for manufacture and personal use in any quantity and any color, without selling the produced models.
Non-commercial use only.
Attribution-NonCommercial CC BY-NC