Open source water testing platform
Open source water testing platform
Published 2015-04-24T10:32:32+00:00
This project details an open source water testing platform derived from the open-source colorimeter, which is made from open source electronics and 3-D printable components. This is part of a larger project to reduce the cost of scientific equipment using open-source hardware. For full BOM, OpenSCAD, and details go here.
For technical details read the paper here: Bas Wijnen, G. C. Anzalone and Joshua M. Pearce, Open-source mobile water quality testing platform. Journal of Water, Sanitation and Hygiene for Development, 4(3) pp. 532–537 (2014). doi:10.2166/washdev.2014.137open access
Print at 0.2 mm layer height, with 10% infill. This uses 195 g of filament and takes 32 hours and 22 minutes.
Date published | 24/04/2015 |
Time to do | 1942 - 1952 minutes |
Material Quantity | 195 g |
Dimensions | 172 mm x 149 mm x 73 mm |
Complexity | Medium |