Screw extruder for Prusa I3 - Estrusore a vite per Prusa I3
Screw extruder for Prusa I3 - Estrusore a vite per Prusa I3
Published 2017-05-19T12:10:09+00:00
Estrusore a vite con supporto per il montaggio su Prusa I3
Screw-driven extruder with sidemount motor for PRUSA I3
(Italiano)
BOM
N. 4 viti M4X50
N. 10 dadi M4 normali
N. 4 dadi M4 autobloccanti
N. 4 rondelle foro 4 mm.
N. 6 dadi M3 normali
N. 2 dadi M3 autobloccanti
N. 3 rondelle foro 3 mm. ridotte
N. 6 rondelle foro 3 mm. normali
N. 4 rondelle foro 3 mm. maggiorate
N. 1 trafila M3X50
N. 2 grani M4X6
N. 4 viti M3X20 testa brugola
N. 4 viti M3X15 testa brugola
N. 2 viti M3X25 testa brugola
N. 4 molle diametro esterno massimo 8 mm. filo 0.8-1 mm. lunghe 25 mm.
N. 2 cuscinetti foro 3mm. diam. esterno 10mm.
N. 2 cuscinetti 628/6 - 2Z (SKF)
N. 1 cinghia T2.5 X 160 mm.
N. 1 barra filettata acciaio inox M8 passo 1.25 lunga 110 mm. tornita ai terminali (scasso inferiore diametro 6mm. X 6 mm. lunghezza, scasso superiore diam. 6mm X 25 mm. di lunghezza, deve rimanere una parte filettata di 79 mm.)
Parti stampate
Tutte parti singole tranne 4 portamolla.stl
(English)
BOM
N. 4 - M4X50 screws
N. 10 - M4 normal nuts
N. 4 - M4 locknuts
N. 4 - 4mm washers
N. 6 - M3 normal nuts
N. 2 - M3 locknuts
N. 3 - 3mm (internal hole dia) smaller washers
N. 6 - 3mm (internal hole dia) normal washers
N. 4 - 3mm (internal hole dia) bigger washers
N. 1 - M3X50 threaded rod
N. 2 - M4X6 grub screws
N. 4 - M3X20 hex/Allen screws
N. 4 - M3X15 hex/Allen screws
N. 2 - M3X25 hex/Allen screws
N. 4 - Springs: external dia max 8mm; thread 0.8-1mm; lenght 25mm
N. 2 - Bushings: external dia 10mm; internal hole dia 3mm
N. 2 - 628/6 - 2Z (SKF) Bushings
N. 1 - T2.5X160mm belt
N. 1 - Teflon pipe: 6mm external X 4mm internal dia; 100mm lenght could be enough.
N. 1 - Machined threaded rod: M8 stainless steel, 1.25 pitch, 110mm long. Machined at both ends, bottom: 6mm dia x 6mm lenght; top: 6mm dia x 25mm lenght.
Remaining threaded rod lenght: 79mm.
Printed parts:
Every single part exept for portamolla.stl
Edited by Gord The Rogue Rev. C/13
Date published | 19/05/2017 |
Technology | FDM |
Complexity | Easy |