Vented Garlic Storage Container
Vented Garlic Storage Container
Published 2017-09-05T16:56:41+00:00
The best way to store garlic is in a well ventilated space away from the light. This handy storage container provides just that...
At standard scale the Vented Garlic Storage Container will hold a garlic bulb up to 60mm in diameter (Small to Medium bulb... depending on variety and where you live). The standard size design was made small intentionally so it could be printed on any machine... however it can be readily scaled up so multiple bulbs can be stored inside at once (assuming you have a reasonable size build plate).
The Vented Garlic Storage Container has a slightly raised centre in the base and a series of vent holes running around the bottom. The top pat also has four small vents to ensure no condensation can build up in the top area.
This is a simple two part print that provides a practical solution and looks great. Use for your own garlic storage needs but also as a unique gift.
Printing in white will allow some light through but will still greatly reduce the intensity of the light. However, printing in other colours adds colour to your kitchen and will further reduce the amount of light that reaches the garlic stored inside. They look great printed in any color!
Refer to the images and print instructions for additional information and please post images of your Vented Garlic Storage Containers in use for other members to see.
Note: If you like this check out the rest of my practical and fun designs.
Printer brand : MakerBot
Printer : MakerBot Replicator 2
Rafts : Yes
Supports : No
Resolution : Standard / 0.20mm
Infill : 15% or more recommended / 2 shells / PLA
Notes : Easy prints... print separately or together if you have a large enough build plate. Check the size of your 'largest' garlic bulbs and uniformly scale to ensure they will easily fit inside.
Post printing
Just place you garlic bulb/s inside...
Date published | 05/09/2017 |
Technology | FDM |
Complexity | Easy |
Support Free | YES |